I will not be posting the answers until this weekend and I'm not sure if I'll have access to a computer over the next few days. This week's set can be seen here:
Rob
I will not be posting the answers until this weekend and I'm not sure if I'll have access to a computer over the next few days. This week's set can be seen here:
Rob
2898 Sure looks like a harpoon head.
2893 Spark Plug Wrench?
Tool Mystery looks like a rubber stitcher to me. Looks like what they use at my work to stitch 2 sheets of rubber together to form continuous rubber sheets and strips.
RogerN
2893 Lug Wrench
I thought that but a 6" long lug wrench with no leverage lead me to go back to my original thought of a spark plug wrench.
2894-
2895- Another that is soooooo familiar... seals airtight, whatever it is made to hold. Welding rod holder!2896- upper (folding) handle off a fire extinguisher
2897- sets courses of, well, something.Northe
2893 spark plug wrench
2894 brackets for mending 2 shelving units together.
2896 Brake lever on swivel wheel.2897 Tool for wrapping Christmas lights on, or light extension cord.
2898 Harpoon tip
O.K. As usual, posting from rec.crafts.metalworking.
2893) Looks like a compact lug-nut wrench for storing in a car with the jack and the spare tire. It might also fit the jack for cranking up (and down) the car. 2894) This looks like something for joining two nearly parallel surfaces with slots which include something for the hooks to grab. It looks to me as though when you tighten the wing nut, the two hooks are pulled together. to grip the object surfaces firmly to the 'T' pieces. 2895) Some kind of storage container. The lid fits into the open top and turning the propeller bar causes the four diagonal bars to extend through the corner slots, and then the four thumbscrews clamp the lid firmly to the inner container. Since it is a double-walled container, it suggest some degree of thermal insulation between the inside and the outside. 2896) Part of a very simple latch -- but not very strong. 2897) Looks like a tool for rotating a fairly large diameter ring, but not capable of producing much torque. 2898) That looks like the business end of a harpoon -- as used in whale harvesting way back when. Back when it was a closer to even game as to who would win.It looks like there is a single rivet which would allow the head to rotate and lock in the wound in the whale, so it would not pull out easily.
There should be a long heavy wooden handle back some distance along the fairly small diameter shank.
Now to see what others have suggested.
Enjoy, DoN.
I will not be posting the answers until this weekend and I'm not sure if I'll have access to a computer over the next few days. This week's set can be seen here:
Rob
Rob
Good job, shorting clip is right.
The rest of them have all been correctly identified, the answers have been posted here:
Back to the normal schedule for the next set, thanks for everyone's patience this week!
Rob
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.