1. Home
  2. PRO/Engineer (Creo) discussions
  3. Cabling: changing the spool

Cabling: changing the spool

I've routed a wire in my assembly and now I want to change the wire
type (i.e. the spool).
Is there a way to change the spool that describes a given wire?
thanks
Reply to
mjkunkel
Loading thread data ...
Select the wire, do 'Edit>Properties>Change Spool'. Or so says the Help = under Electrical Design>Diagramming. Don't know, have never done it = before.
David Janes
Reply to
Janes

Site Timeline

Related

  • Component in rollback state; assembly is inaccessible now.

  • Really weird... The assembly has a mirrored sub-assembly. I then opened the...

  • wire/cabling

  • Hi Folks, We have several photo kiosk designs under development for in...

  • does aluminum spool wire have a "shelf-life"?

  • Sealed rolls, or what's been sitting in the gun? Depends on how it has been...

  • feet per spool

  • Hello, I would like to know, if at all possible, how many feet of weldingyou...

  • wire spool wind direction

  • I have a Lincoln 175 MIG. Why are some of the wire spools you get fromLincoln...

  • Heat Wire / High Resistance Cabling

  • Anyone know any good sources to buy Heat Wire / High Resistance Cabling off of...

  • Cabling in Solidworks

  • Can anyone suggest some material or sites which can help me indesigning cable...

  • clarke spool gun welder

  • Has anyone here ever used a Clarke 180 amp spool gun welder? I am currentlyusing...

  • spindle assembly

  • Hello all, I am a little confused on how the spindle assembly works onmy drill...

  • Cabling in SWX assemblies

  • Anyone got recommendations or experiences of add-ins to enable designof...

  • Change Density when Changing Configurations...

  • Hello,SW does not seem to be able to distinguish the change in density when...

  • macro to change sheet formats

  • I have a series of drawings which need to be released to the factoryon a...

  • New spool of MIG wire -WOW!

  • My baby MIG has been cantankerous lately: wire sticking, funky arc. Looking at...

  • sp2.1 CTRL copy components in assembly

  • Is there some new trick to make copies of components in an assembley? What I did...

  • Well, now I've done it.

  • Emptied out the shed today to make it into a dedicated blacksmithingshop. I was...

  • Lincoln Magnum 100SG spool gun on a SP175 Plus?

  • I recently purchased the spool gun without checking compatibility with...

  • how to change original bridgeport feed to new servo unit

  • I have an old Bridgeport machine 1968 1hp with the old style feed for the...

  • Spool guns?

  • I'm doing some shopping, all the mig machines say to use a spool gun for Al...

  • what diameter wire to use to get 3/4" fillet in 1 pass?

  • What diameter wire to use to get 3/4" fillet in 1 pass on 1 1/2" thick...

  • Vise Grips now made in China

  • Good thing I got too many of them now, and that a lot will be available in my...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.