1. Home
  2. PRO/Engineer (Creo) discussions
  3. gear

gear

Loading thread data ...
google gears in this NG, you'll find lots of references. some them contain detailed instructions on creating spur gear tooth geometry.
David Janes
Reply to
David Janes

Site Timeline

Related

  • Spur gear source?

  • I need a 32 tooth spur gear to mesh with the 7/8" X 8TPI leadscrew on my la the....

  • Gear Hobbing

  • Some of the early articles on gear-hobbing using a stepper motor turning the...

  • Spur Gear Differential

  • A few people expressed interest in seeing the spur gear differential...

  • Spur gear YouTube

  • Grainger catalog:Item # 1L994Spur Gear, 6 Pitch, Pitch Dia 5.000 In, Face Width...

  • Machining a spur gear

  • Here's a video on YouTube you might enjoy aboutmaking a brass spur gear from...

  • Colchester gear: $800!!!!!!

  • Awl--My buddy's 13x40 Clausing-Colchester wore itself out, needed a gear in...

  • Torsional deflection in spur gear pinion?

  • Many years ago, the final drive for the M55, a 50 ton 500 horse power tracked...

  • gear cutter terminology

  • I have to admit I've never cut a gear. I do have some gear cutters,...

  • Longitudinal feed gear

  • I have a 24-150. The longitudinal gear is worn and needs replacing. Anyone know...

  • spur gear...mi girano

  • la spur gear deve essere stretta bene....per questo te le bruci

  • Gear cutting hob

  • I need to make a 32t helical gear to mate with my 8TPI acme leadscrew. I ha ve a...

  • looking for a spur gear

  • I am looking for a simple spur gear for an 13x48 Turnmaster lathe. Thecompany...

  • Removing Gear Box from Dayton Gear Motor

  • I purchased a Dayton 5K942 gear motor. The motor had burned out--windings onone...

  • Problem Cutting 12 tooth Spur Gear

  • I need to make a 12 tooth 20DP 14.5 degree involute spur gear.I've cut...

  • starter bendix gear

  • Anyone have any experience with welding & remachining new teeth on a...

  • How to put wheels (landing gear) on balsa Spitfire?

  • How do I attach the wheels and landing gear on a Guillow balsa Spitfire model....

  • Screwcutting Gear Ratio Calculator Threading Screw Cutting Lathe Gear Selector

  • The gearing isn't that difficult to figure out. If the spindle and leadscrew...

  • Gear lube for change gears?

  • Any recommendations for open gear lube? Hopefully, something easy to find.My...

  • spur gear vs rack and pinion design

  • then how can we calculate number of teeth for rackas for spur gearnumber of...

  • Wipac Cj magneto drive gear

  • Hi, I've recently acquired my first stationary engine, a 1949 Ruston pt....

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.