ARM: cyber-hobby.com 1/35 scale Sturmpanzer IV Brummbaer - Early - Smart Kit

Oct 18, 2008 2 Replies

Kit Review: cyber-model.com 1/35 scale Kit No. 26 (Dragon Models Limited 1/35 scale =9139-=9145 Series Kit No. 6497); Sd.Kfz. 166 Stu.Pz. IV =93Brummbaer=94 Early Production - Smart Kit; 867 parts (518 in grey styrene, 260 =93Magic Track=94 links, 64 etched brass, 14 clear styrene,



10 etched nickel, 1 length of twisted steel wire); estimated price US $50

Advantages: reworking of previous Sturmpanzer IV 2-in-1 kits to match features found on Early model; complete main gun assembly and partial interior; choice of options and assembly



Disadvantages: mixture of Smart Kit and non-Smart Kit features



Rating: Recommended



Recommendation: for all German heavy armor and Panzer IV series fans



DML=92s =93boutique=94 affiliate cyber-hobby.com has now released the earl= y model of the German Sturmpanzer IV, also called =93Brummbaer=94 (grizzly bear). This kit adds several new sprues, drops others, and also adds in some of the sprues from the =93in your face=94 Pzkw. IV Ausf. D and E variants.



This variant uses the =93early=94 Tiger I type vision slit and viewer, does not require zimmerit, and has all standard Pzkw. IV wheels and bogie assemblies. It comes with the different barrel and barrel shroud and the revised front plate with the box-like position for the driver, which requires an entire new casemate and rear engine deck as well as all of the other details for the casemate. For a =93boutique=94 kit, DML went through a lot of trouble to make the earlier version; at least



283 parts have been replaced or added.

From what I determined last time, the first 60 Sturmpanzer IV did not have zimmerit paste, so the good news is that DML dodges the =93bullet=94 on this kit. An applique is included to replicate the original=92s 50mm add-on to bring the lower glacis plate up to 80mm equivalent.



The model retains the etched nickel side shields for the =93full-up=94 vehicle. These are nicely done but will need care as the mounting brackets are all plastic; modelers may wish to =93etch=94 the surface a bit with a chemical blackener so the adhesive of choice (either cyanoacryalte glue or epoxy) can =93bite=94 and hold it in place.



There are three suggested finishing options: Stu.Pz.Abt. 216 in Russia, 1943 (overall sand); III./Pz.Jg.Rgt. 656, 1943 (sand with green squiggle pattern, white 3); and Stu.Pz.Abt. 216 again, 1943 (now with three color mottle and white outline numbers). A set of Cartograf decals with two types of =93number jungles=94 are included.



Overall this is a lovely kit which, barring any major mistakes, is better than the original which flubbed the zimmerit finish. I am sure that it will invite comparison with the Tristar kit of the early model which beat it to the market as well.



Thanks to Freddie Leung for the review example.



Cookie Sewell


released the early

slit and viewer,

Which type of muffler does it have--the full width type seen on the D and E, or the shorter type seen on the Ausf. F and later types? Tristar's has the wide type, but only a handful were actually built in this configuration. Gerald Owens

w released the early

n slit and viewer,

zer IV did not

e =93full-up=94

From what I recall it had both in there. As the full review said (posted elsewhere) they mixed a lot of sprues from the "Smart Kits" and the non-"Smart Kits" (e.g the Pzkw. IV D and E models) as well as some new stuff together.

Cookie Sewell

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required