teach me to solder hand rails

i want to solder .020 wire and i dont know how to do it. use a paste flux or rosin core solder? any hints? thanks

Reply to
snowdog
Loading thread data ...

If you want more detail on the fence technique, see the Dayton N-Track website:

formatting link
select "Links" from the left hand menu, then "Tips and Tricks", finally "Scratchbuilding Chain Link Fence"

Reply to
Joe Ellis

thanks so much...that is great information for which i could not find online.

good idea about the pc bus wire for an n scale fence, too.

doug

Reply to
snowdog

Hi:

Soldering is a learned art in which there are many techniques, tools and materials to achieve the same results. A basic understanding of the process and the means to accomplish the ends is highly desirable to avoid failure. Then a wise choice of method and components can be made for the job at hand..

For more details with methods and extensive discussion of problems and solutions, see first site below in soldering.

Hope this helps.

Thank you,

Budb

Author of:

MODELRAILROAD TECHNICAL INFORMATION

formatting link
PROTOTYPE TECHNICAL INFO FOR MODELRAILROADERS (Revised. New address)
formatting link
Moderator of: MR TECHNICAL HELP GROUP
formatting link
COUPLER HELP GROUP
formatting link

Reply to
bigbud

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.