miller syncrowave 350 lx set up

the tig torch that came with my syncrowave 350 lx is set up for the old lug style machines, is there any way to adapt it for the dinse connections on this machine? The dealer I got it from is cluless, and the owners manuals are not much help. I have a 1/4" compression fitting on the gas line which will not fit into the dinse connector, and I have a left thread 3/4" (maybe) fitting on the power lead which does not fit the 1/4" left thread hole on the front of the machine.

Also have one of the new multi volt machines and have made my own adapters. Does miller make something slick for plugging in their multi volt machines. my adapters are not so beautiful.

Reply to
scooter
Loading thread data ...

It should have come with a Diamondback (liquid?) with the DINSE, Sounds like it could be the dealer gave you the wrong torch unit. Check the part # against the index in the manual and it may clear up the problem. I had the same thing with Miller sending me a DINSE on a 300A torch that was the size of a peanut (No joke) The dealer goofed up...If it's got a Cool-Mate double check that too. There are so many torch connectors out there now it's a veritable nightmare to do without having it in front of you. I feel you pain brother, Mine was last week...

Rob

Reply to
RDF

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.