1. Home
  2. ⚡ Welding Forums
  3. Powcon 300 MS-stick welding

Powcon 300 MS-stick welding

Hello!
I have a older POWCON 300MS-Inverter! can i weld stick strait from this
machine?without any other welding machine?
Thank you!
Reply to
Sima
Loading thread data ...

Further Reading

  • Powcon stick welder - good welds

  • Hi everyone. I used a Powcon welding machine to SMAW / stick to weld some steel...

  • PowCon questions

  • Hi all,I'm a welding novice. I've been using my Lincoln 135 Plus for a...

  • Powcon 300 st

  • I have just purchaced a powcon 300st welder of ebay. It was not wired for220V...

  • Powcon 300ST Info

  • I am about to get a used PowCon 300ST welder. I would like to get the...

  • PowCon 300ST part identification

  • I got a powcon 400ST for free but the wiring of the front panel is...

  • Powcon 300 st

  • I have just purchaced a powcon 300st welder of ebay. It was not wired for220V...

  • PowCon 400SS.....$250

  • http://inlandempire.craigslist.org/tls/1879631806.html"A conservative who...

  • Will a Powcon 300SM Inverter work with a Lincoln LN-25 Wirefeeder?

  • Guys, I need some advice and help... I came across a used LN25 CV/CC wirefeeder...

  • powcon 300st or a maxstar 150 st

  • Hi am looking for advice. I am torn between buying a used powcon 300ststick tig...

  • Powcon 300ST Info

  • I am about to get a used PowCon 300ST welder. I would like to get the...

  • Powcon 300SS board faults

  • HiDoes anyone know what components tend to fail on the Powcon 300SS boards. Iam...

  • Anyone want a Powcon 300ST manual?

  • Hi,I've got a Powcon 300 ST manual, but no Powcon 300 ST. If anyone wants...

  • Powcon Tig welder loose wire

  • There is loose bleu wire running from the back to the front of mypowcon 400...

  • Welding "Anti-Stick"?

  • Hi,Is there some compound or liquid that I can spray or rub on betweenparts that...

  • IDEALARC 300/300

  • I paid about $1300 for a Lincoln square-wave TIG 300, which is a pretty...

  • Welding bench thickness

  • How thick should the steel of a welding bench be? I guess it will vary with what...
  • « previous thread

  • Ouch

  • I bet thats gonna hurt in the morning. Best Regards Tom.
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.