1. Home
  2. ⚡ Welding Forums
  3. Ranger 8 low welding amp in DC positive and none in DC negative

Ranger 8 low welding amp in DC positive and none in DC negative

was welding and current dies ---selector was bad ---changed it ---now I get low
amp not enough to weld and nothing in DC negative
Reply to
Jackie R Weisinger
Loading thread data ...
was welding and current dies ---selector was bad ---changed it ---now I get low amp not enough to weld and nothing in DC negative
Reply to
Jackie R Weisinger

Further Reading

  • Lincoln ranger 8 suddenly stop welding

  • This ranger 8 was working good, I stop welding for a moment then begin to...

  • Welding aluminum with DC

  • I would like to try welding 1/8" thick aluminum angle with DC reversepolarity...

  • uneven brushwear in permanent magnet dc motors

  • Hello all...I race 1/24 scale cars that use high performance permanent magnet...

  • DC Generator

  • All,A fella runs a junk yard and has a crane with an electro-magnet formoving...

  • Negative 48 Volts DC

  • Is anyone willing to explain Negative 48 Volts DC? I'm trying to learn about...

  • FS-250 amp AC/DC Squarewave 1ph TIG welder

  • I posted this on Craigslist as well. (Anyone here gets a better deal). 250 Amp...

  • Air Arc with a Ranger 8?

  • I'm wondering if a Lincoln Ranger 8 can do Air Arc? I asked at the local...

  • cellulosic -- DC-ve (DCEN) or DC+ve (DCEP)

  • The majority of our work is downhill pipeline related welding and here is...

  • 120v DC to 24 or 36v DC step down

  • Looking for an adapter or step down transformer from 120v DC down to 24 or36v...

  • Welding in water

  • Oh yeah, also if you get your body between the ground and theelectrode, in salt...

  • Difference between AC and DC stick welding

  • Most Electrodes nowdays are designed to run on AC current, DC+ or DC-. The only...

  • lincoln ranger 8 troubleshooting

  • I have a Ranger 8 that has been sitting in enclosed building for several...

  • Miller Legend DC missing

  • Looked at a Miller Legend NT for sale. The 60 and 100 Hz output seemed ok...

  • Tried welding aluminum with DC :)

  • DC puts the heat in the metal being welded..AC alternates and takeshalf the heat...

  • Positive or negative discharge?

  • I have a school-kit van De Graaf generator. I am fiddling around with the charge...

  • Lincoln Ranger stop welding

  • I raised the amps from 130 to 145 during this is process the welder complained...
  • « previous thread

  • Cold Weld ???

  • I made a pin puller yesterday as a project with my dad when he and my mom...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.