On Victor tips, there is a xx-x-xx number. What does each of the
numbers mean? Just for a standard cutting tip.
Steve
- posted
8 years ago
- Home
- ⚡ Welding Forums
- Tip # explanation
Tip # explanation
Loading thread data ...
- E
-
Ernie Leimkuhler
- posted
8 years agoWed, Nov 6, 2013 8:18 AM
They have to do with how fast the tip is designed to cut.
The faster tips are for automated cutting machines, like track burners
and pattern cutters that are designed to use higher pressure O2 and
travel much faster.
The markings can also designate which gas the tip works best with. Propane, Natural Gas, MAPP, and Acetylene all have different tip designs.
The markings can also designate which gas the tip works best with. Propane, Natural Gas, MAPP, and Acetylene all have different tip designs.
Further Reading
-
Victor torch tip part number meaning?
- I picked up an older Victor 100 type handle with cutting torch attachment....
-
Victor tip size?
- I bought an old Victor portable welding kit with a J28 torch, 2-W-J welding tip...
-
Merlin XX
- This has just surfaced on the BBC Cumbria...
-
Isorohr NG xx
- Bei uns um die Ecke im Marktkauf gibt es Isorohr in den Grössen NG XX. Ichgehe...
-
Victor torch tip part number meaning?
- I picked up an older Victor 100 type handle with cutting torch attachment....
-
WTT F-102 Case X for Case XX wings
- I would like to trade my extra Monogram Pro-Modeler F-102 Case X wing (with...
-
Replacement Tungsten Carbide cutting tips cpde CCMT XX YY ZZ
- Someone was asking recently about the codes.My "Dead Sea Scroll" on the matter...
-
Cesaroni Pro-xx Motor Reference
- I have compiled a Cesaroni Pro-xx Motor Reference as of 15-Nov-03this...
-
Xx vs XJx
- Oops just realised you are not registered so can't PM you. Let me knoif that...
-
Definition Schutzklassen IP xx
- Hallo Experten,(ich hoffe, dass diese Frage nicht schon x-fach behandelt...
-
old Victor torch tip nomenclature
- Sometime in the last few years Victor has changed the way they describe torch...
-
Victor 315 rebuild
- The achilles heel of Victor torches is the fact that they are "bodymixed"...
-
Victor type 17 torch tips
- Hi all Anyone know of aplace that sells victor type 17 welding tips (for J...
-
Victor type 17 torch tips
- Hi all Anyone know of aplace that sells victor type 17 welding tips (for J...
-
Gas where you are
- What do you pay for a 20# CO2 owner cylinder on tradeout? Steve $13 plus hazmat
- « previous thread
-
The part came back ...
- Because it cracked on the weld when the guy tried to drive a ball bearing back...
- next thread »