1. Home
  2. ✈ RC aircraft models
  3. Doubler airplane

Doubler airplane

Don't even have the maker of it but it's called a Doubler. Has no rudder
but two fins on each end of the stab. Does anyone have the correct CG
location. thanx
Reply to
TX_QBALL
Loading thread data ...
Sig sold a Doubler, but that doesnt sound like the same plane from m
memory...got a pic
-- David Hogu
My name is David Hogue, and I am addicted to this model airplan
thing... ----------------------------------------------------------------------- David Hogue's Profile:
formatting link
this thread:
formatting link
Reply to
David Hogue
It should be %25 to %30 percent of Mean aerodynamic chord.
If you go to google and look for the following keywords then you'll find some answers: root tip chord cg mac swept tapered
e.g.
formatting link

Reply to
Steve Banks

Site Timeline

Related

  • What's a doubler?

  • Ok, I've been reading up on building in preparation for building my first...

  • Peut-on doubler cette architecture automate avec du relayage ?

  • Bonjour,J'ai une architecture automate SIL2 composée d'une carte Allen...

  • Train & Trooper Hobby Shop in Maine -- Is it still there?

  • The T&T folks are good people. I went to their shop several times whilethey...

  • Must finish a job, but don't have the right gas

  • I am in the middle of a job and ran out of argon. Called my local supply shop...

  • Even some model railroaders don't get it

  • It was about 10:30 at night on Christmas Eve as I took EllaFitzgerald's...

  • oh turds! compressor motor starting cap's 'blown out' but it's a "non-standard"

  • my ancient 4hp sears craftsman air compressor needs a starting capacitor,...

  • Way- way way ot but I don't have a clue

  • An old timer taught us to fight - get in the habit of firing 3 round groups in a...

  • Another OT post but it's important

  • Well fellas, I decided to go back out and work the shop full time. Here is...

  • NWARS- OK, it's a long shot but I have to try.

  • The following is for members of the Northwest Arkansas Rocketry Society, now...

  • Identity of old airplane

  • I'm looking for plans or a kit to build a model of the plane I first flew...

  • Kindling maker

  • I want to make a hand operated kindling maker. When I split logs, I split some...

  • Part Maker vs DP Technology

  • From people I have talked to, Part Maker is the much prefered way to go.

  • Help identifying anvil

  • Somebody recognized it and it looks like I scored."According to Postman's...

  • Estate Collection of Airplane Models

  • I am writing for my 80-year old Father-in-Law, that collected airplanemodels for...

  • I have a pair of Airtronics Vanguard VG6DR transmitters, one still in plastic, NIB, the other excellent but used, all the chargers and batteries and flags, they are FM of course, but both have the gold seal on the bottom. What are they worth?

  • Airtronics Vanguard VG6DR I have a pair of Airtronics Vanguard VG6DR...

  • Maker Fair

  • --Maker Fair will be this coming weekend in San Mateo, CA. Anyonegoing?...

  • original lionel model 55 1936 airplane

  • Nevertheless, while not very common, I have seen those "airplane" units gofor...

  • Mold Maker

  • Har Jing Plastic Mold Co., Ltd Been devoted to the research anddevelopment of...

  • AIR: People Sure Don't Go Nuts For Japanese Airplane Kits...

  • Don't know about that, but I do know that IJN/IJAAF modelers are servedby...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.