1. Home
  2. ✈ RC aircraft models
  3. Foam wing cutting

Foam wing cutting

I am almost afraid to post this following the beating I took when I last posted here. But here goes... my son has put an 8 minute segment of the 2 hour video tape on cutting foam wings by hand out on youtube. Before you ask, yes it still links to his website that sells the full video. To find the 8 minutes go to the youtube website and type in foamwingcutting all as one word in their search box. That should take you directly to the video. He has added a downloadable feature direct to your PC if you do not want the video in VHS mode. Bob Furr

Reply to
icerinkdad
Loading thread data ...

I am rarely critical of another's contribution to the hobby, but the production work on this video is terrible. The camera zooming in close and then moving back and forth, back and forth, back and forth, ...... and all without reason. It was enough to give me motion sickness.

Reply to
Morgans

Hi, Jim.

I guess you get what you pay for.

Ed Cregger

Reply to
Ed Cregger

Thanks Ed, as you point out the 8 minute segment is free. If a person there does not find something helpful there they are under no obligation to buy anything. To be honest I have never claimed that this was a professional, polished video. It was something that we put together here because no one else had done an introduction to using a hand held bow for foam cutting in video. Almost 8 years later and that is still the case. Now if someone wants to take the risk and the cost and do something similar using a professional studio good luck and God bless you. Till then, if you want to know how to cut foam wings by hand I am glad to be of help. Bob.

Reply to
Bob

Wow! Just over 2 months on youtube and over 2000 viewings. It seems quite a few folks want to know how to cut foam wings by hand. BTW the easy way to pull up the video is to type in "foamwingcutting" all as one word in the youtube search box. Bob

Reply to
Bob

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.