Hey guys I just picked up the Hanger 9 Extra 260 ARF and plan on using a DA50 on it.Any suggestions on muffler DA50 standard or Pitts? What type of servos would you suggest for my Futaba radio? Any other hints or tips would be greatly appreciated.!!!!!!!!!!!
Thanks, Steve
Didn't find your answer? Ask the community — no account required.
A
airhud
Hey guys I just picked up the Hanger 9 Extra 260 ARF and plan on using a DA50 on it.Any suggestions on muffler DA50 standard or Pitts? What type of servos would you suggest for my Futaba radio? Any other hints or tips would be greatly appreciated.!!!!!!!!!!!
Thanks, Steve
P
Paul in Redland
I used the Pitts muffler that DA has for that engine, it's a Slimline and installs real easy. Several ways to go on the servos, coreless, digital etc. Just make sure the one's you use are strong enough, don't scrimp here. You'll need a battery that can supply the load that the servos will demand also. A small 4 cell pack won't cut it. I located the fuel tank under the wing tube, and other than that pretty much followed the assembly manual. The plane balanced perfectly with out needing to add any weight! There's a ton of info at RC Universe in the forums about the Hanger 9 Extra
260 and the DA50 in the gas engine forum, check it out, you'll be glad you did. Paul
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.