i HAVE A USED MAXIM 630 WITH A ACRAMATIC 950 CONTROL AND i CANT GET THE CONTROL TO RECONIZE THE 2ND PALLETS OFFSETS. i NEED TO KNOW HOW TO TELL THE MACHINE TO ACTIVATE THE 2ND PALLET i THINK.
- posted
15 years ago
i HAVE A USED MAXIM 630 WITH A ACRAMATIC 950 CONTROL AND i CANT GET THE CONTROL TO RECONIZE THE 2ND PALLETS OFFSETS. i NEED TO KNOW HOW TO TELL THE MACHINE TO ACTIVATE THE 2ND PALLET i THINK.
It should activate the second pallet offset when the shuttle rotates to put pallet 2 in the machine. That usually happens at M2 when the other pallet status is marked NEW in the pallet table.
You should be able to force a pallet swap by programming M101 for pallet 1 or M102 for pallet 2 in MDI.
I hope you have a programming manual - the 950 has lots of unusual features...
HTH, SteveA
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.