Opening for Microprocessor RLM-Engineer

Post: Processor RLM Engineer

Job Description: The Candidate Needs to Work with the Micro Processor Development Team with our Client Semicon R&D Lab.

Desired Skill Set: # 3+ years of active hands on experience in designing Macros for Processor Development or similar product Will work with Processor Unit Leads and other Circuit Designers to implement small ASIC like Macros in advanced deep submicron low power technology nodes. # Must be familiar with modern high-speed and low-power circuit design techniques # Must be familiar with design issues in 90 nm and smaller nodes. # Understanding vhdl, logic and digital design concepts, clocking, clock phase, setup time, hold time borrowing etc # Transistor Level Timing Closure, implement the layout, make changes to layout for optimal timing # Physical design using modern automated place-and-route (preferably Cadence based) and DRC/LVS/ERC tool flows. # Cadence Custom Design Tools - Schematic editor, Virtuoso LE and virtuoso XL.

Contact Person: Subhendu Email: snipped-for-privacy@handigital.com

Reply to
subhendu
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.