⚗ Material Sciences

  1. Home
  2. ⚗ Material Sciences
1792 Threads Posts
to

Conducting Polymers

Hi Does anybody have good reference of conducting polymers/blends- thin film or composites having high Poisson's ratio....
0 comments posted 21yrs
posted by ravishankar.aggarwal
0 comments posted 21yrs posted by ravishankar.aggarwal

Conductivity v Temp In Alloys v Pure Metals

The thermal conductivity of pure metals decreases dramatically with temperature. The exact opposite happens in alloys. T...
4 comments posted 21yrs
posted by bretcahill
4 comments posted 21yrs posted by bretcahill

Garolite properties

I have looked up the properties of Garolite G-9 and see that its rated tensile strength is 39,000 psi (in rod form). I'...
1 comments posted 21yrs
posted by eromlignodNOSPM
1 comments posted 21yrs posted by eromlignodNOSPM

Deflection calculation

Morning, I am running a deflection calculation to size the amount of force needed to pre-bow a piece of rectanglur stee...
1 comments posted 21yrs
posted by bgallagher
1 comments posted 21yrs posted by bgallagher

High Thermal Conductivity In Ni Cr Alloy

Has there been any effort to increase the thermal conductivity of high temperature high strength Ni Cr alloy? Something...
0 comments posted 21yrs
posted by bretcahill
0 comments posted 21yrs posted by bretcahill

Aluminium Finishing

I am researching the world trends in aluminium finishing and the use of alternative methods due to the banning of chrom...
0 comments posted 21yrs
posted by martin.coleman
0 comments posted 21yrs posted by martin.coleman

Pore size control in sol gel materials

I would like to know the recent research on controlling pore size in materials synthesized by sol-gel method.
1 comments posted 21yrs
posted by viroteb
1 comments posted 21yrs posted by viroteb

alpha helix and beta conformation in proteins

could some tell me how the alpha helix and the beta conformation in proteins are important in the configuration of prot...
1 comments posted 21yrs
posted by elloumi
1 comments posted 21yrs posted by elloumi

Cu Tensile Strength v Temperature

Where does the tensile strength of copper start to drop off precipitously? Bret Cahill
3 comments posted 21yrs
posted by bretcahill
3 comments posted 21yrs posted by bretcahill

grinding cobalt

hello. i'm a 3rd year materials engineering student at cal poly san luis obispo. i've got some cobalt discs mounted in...
1 comments posted 21yrs
posted by brian.stahl
1 comments posted 21yrs posted by brian.stahl

Attaching phosphor to zinc

I have zinc particles of 0,3-1,0 mm on which I have to attach phophor particles with a size of approximately 0,015 mm....
0 comments posted 21yrs
posted by roy.visser
0 comments posted 21yrs posted by roy.visser

Best material for snowballs ? ? ? ? ?

What material can you recommend for creating the strongest and most deadly snowballs possible????
3 comments posted 21yrs
posted by zendo_joystick_ankh_hero
3 comments posted 21yrs posted by zendo_joystick_ankh_hero

Need to make a flexible tube.

I need to make a short flexible coupling tube that will connect the intercooler in my car to the turbocharger intake tu...
0 comments posted 21yrs
posted by borism_-void-_
0 comments posted 21yrs posted by borism_-void-_