1. Home
  2. ⚙ Mechanical Engineering
  3. friction hinges

friction hinges

For those interested in the spring clutch formula, you can contact us
at snipped-for-privacy@hanayainc.com. We'll be glad to email it to you. It is an
obscure formula published in 1939 by C.F. Weibusch
Good luck
formatting link

Reply to
stainless
Loading thread data ...

Site Timeline

Related

  • Friction hinges

  • It"s very difficult top combine friction and spring, if you want toachieve...

  • Interested in Metallurgy

  • So I am currently a lab technician at a materials testing facility and...

  • For those interested in W.W.I...

  • a friend of mine associated with the Army museum at Carlisle says...

  • Formula for spring constant?

  • If I make a helical spring out of size X music wire, of length L anddiameter D,...

  • Friction (clutch) lining

  • You're going to use hydraulic pressure to engage the clutch?Not very good...

  • Re: (photo of trouble attached) Re: can not remove 1/2 of an exteriordoor lock...

  • I have a door with the lock broken in locked position. It appears I will hvae...

  • A-10 website for those interested.

  • Here is an A-10 site I found for anyone interested, started by those in theA-10...

  • CAPI Imac Pictures Online for those interested.

  • I posted some pictures from the Capitol Imac contest held in Bowie, MD forthose...

  • Lathe clutch

  • I was talking with someone yesterday regarding the relative merits of theMyford...

  • Myford clutch

  • I'd like a clutch for my ML7, but they seem very hard to get hold...

  • return spring for rockwell quill

  • There is no spring on the quill of my rockwell vertical mill. I find this so...

  • can you weld paperclips?

  • I'm in the process of building a model structure. I wanted to usesomething...

  • Colchester lathe clutch

  • The clutch on my Colchester Triumph 2000 has finally packed up when used in...

  • Macine Speed Formula / Ratio

  • I have seen posted here before a formula or ration for machining speed. I...

  • clausing colchester clutch adjustment

  • I sent this a cupla days ago, but didn't see it in the rcm ng.Those clutches...

  • Formula-U polyurethane paint

  • Does anyone still sell Formula-U paint? I have tried Pactra andMidwwest Hobbies...

  • Monokote hinges

  • Has anyone tired using old floppy discs as hinges? I've cut up a few andthey...

  • can you pour brass in a mold?

  • Could a person melt brass or bronze with a oxy welding torch in acruxible and...

  • can you weld a pinhole in a water tank?

  • If it's a lined tank you are probably going to have to stick withnon-heat...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.