Here's a link to an interesting article:
formatting link
Here's a link to an interesting article:
Not a bad article, but they forgot to mention that it'll be a WHOLE lot easier to drill holes in that metal with a Carbide bit...
It's also a lot easier to cut the shape using a Dremel/Foredom/grinder using cut-off wheels...
BTDT!
For the record: the damascus article on the same website is bullshit.
Adam Smith Midland, ON
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.