Gunner Asch fired this volley in news: snipped-for-privacy@4ax.com:
No, it's called "micro-miniature contorsionism".
You can't get to the top of the tank, except by boring holes in the OUTSIDE of the body of the truck. The body plate (1/2" thick) IS the tank top. I don't want tubes on the tank hanging outside the engine compartment. You cannot get to the ends, except for one 2" diameter level gauge port on one end, only.
This is _period_, not "if I had small enough hands, or a drill that did three zigs and a zags."
Besides, you're a running behind. I posted that I already decided to put a new dip tube in the sensor plate. I electrolytically de-rusted the tank Thursday, since I had the port cover off, anyway. I drilled and tapped a 1/2" drain in the bottom.
LLoyd