Electrical. I put it on "inactive" when I took the machine tool repair job 8 yrs ago. Two more years and it goes out and Ill have to retake the test again if I dont activate it before then.
Way too many starving electrical contractors in my area. Shrug.
Gunner
"Gun Control, the theory that a 110lb grandmother should fist fight a 250lb 19yr old criminal"
Didn't find your answer? Ask the community — no account required.
M
Martin H. Eastburn
That is what I have been saying for years. The car gets to part in the shop typically 1 day - before the moving van drives up. Then out into the 'cold'.
Until I got a Mill - the first thing off the truck was a Shop floor rug. :-)
Martin
B
Backlash
Around here, about 10.50 per foot for a 2x14" LVL. That's laminated veneer lumber, similar to plywood, but with the grain aligned to all run in the linear direction for strength.
RJ
B
Backlash
R
Roy J
Backlash mentioned LVL (Laminated Veneer Lumber) which is plywood with all the panels running the long way for strength. There is also glue lam which is 2x4's glued up into whatever depth beam you want. The is also an Oreinteed Strand product (forget the trade name) That looks like a bunch of worms molded into a beam.
The LVL is the most common around here. Basic product is 1-3/4" thick so two of them nailed together match a 2x4 wall. Standard stock sizes are 9-1/2", 11-1/2", and 14". Stores ususally have some stock lengths including a 14" deep one 17' long to go over a double garage door. The product is made in 70' lengths so you can special order most anything you want. Strength is about 1-1/2 times that of an equivilent wood beam of the same depth. But the LVL is MUCH straighter and more uniform.
Price on a 14" deep one is about $4 a foot. Available at any decent building materials place.
Weight on a 14" deep one is about 7 pounds per foot. A 20' piece runs about 150 pounds, a couple guys can hoist it into place, 3rd guy nails it in. Then do a second one to get the strength you need. Narrower ones are easier to deal with.
Jim Stewart wrote:
J
Jim Stewart
I already checked.
In my city, the building inspector does a walkthrough before the sale can close. Any permit-required work that was done without a permit gets fined at 2x the original permit cost.
In reality, this in itself could be a bargain. Normally, when you get a permit signed off for an improvement, they forward the info to the county assessor and you see your property tax go up. It doesn't take many years of missing the property tax boost to pay back the fine.
My reasons for getting it permitted is so that I know it's safe and that I don't have any issues with my insurance company. Up to now, the city inspectors have been knowledgeable and easy to work with.
G
Gary Coffman
It is laminated wood, 8 inches wide and 24 inches deep. Cost $300 delivered. I don't know exactly what it weighs, but 4 guys using 2 stepladders put it in place one end at a time. This is apparently a common stock item as my contractor had no problem getting it.
The building inspector commented that this is better than a steel beam because it won't quickly soften and sag in a fire, just chars on the outside. So there's less chance the building will fall in on the firemen in case there's a fire in the shop.
Gary
S
Sunworshiper
By all means do what you have to do. Out here I think they just want to use their legalized extortion. Many houses around me have been sold that have been doubled in size with no permits. One got poped , but they said ok cause he had a bunch of pictures. I'm thinking about redoing the carport ad-on that who ever did it didn't know what they where doing. No one said a word about it when I bought the house. I've got a bunch of 8"X16" beams that I know it will hold up better than what is there. If I call in the thugs I'll have to pay $4,000 for a rubber stamp from an engineer and pay them too. I'd love to move to the hill country in TX. you can do anything you want without worrying about that stuff. What is really funny is that the top thugs use un-licenced contractors to do their property cause they checked out who does the best work.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.