Resistance of different metals

Can anyone tell me the resistance values of different metal tubing? Like emt compared to copper,stainless,and aluminum? (This is for antenna building).

Reply to
stryped
Loading thread data ...

Try

formatting link

Reply to
Fred R

or

formatting link
-- very nice.

Reply to
Tim Wescott

Where would emt fall on that list?

Reply to
stryped

emt?

Reply to
Tim Wescott

EMT condiut. WOuld it be the same as regular steel?

Reply to
stryped

Accordint to that list copper is the most conductive. DOes that mean it is the best to make an antenna out of? DOesnt copper "tarnish" or rust out in the environment?

Reply to
stryped

Tarnish, yes. Rust out -- not unless you're by the sea shore. But that's why you're asking about paint.

I _think_, but don't know, that the copper oxide isn't terribly conductive and so doesn't mess up the antenna characteristics. Aluminum is quite good -- it's very conductive, aluminum oxide is very non-reactive and is a perfect insulator, so there's no dissipative layer.

Reply to
Tim Wescott

You tell me -- is it galvanized? What of the skin effect?

Reply to
Tim Wescott

Design a Wheatstone bridge and measure them. It depends on so many many items - alloy , and dimensions ....... attachment...

Martin

Reply to
Martin H. Eastburn

Between zinc and iron, depending on skin depth. You indicate elsewhere you might be in the +100MHz range, so probably zinc. Which isn't too bad.

Better than stainless.

Tim

-- "I've got more trophies than Wayne Gretsky and the Pope combined!" - Homer Simpson Website @

formatting link

Reply to
Tim Williams

Ive got a 375' plus spool and at least a hundred feet more of .020 x .125 MWS-294 resistance ribbon, if anyone needs some

Google is your friend for the data.

Gunner

"At the core of liberalism is the spoiled child - miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosphy of sniveling brats." -- P.J. O'Rourke

Reply to
Gunner

Yes, it is galvanized.

Reply to
stryped

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.