A new set has been posted, I'm not going to be able to post the answers until Sunday.
Rob
A new set has been posted, I'm not going to be able to post the answers until Sunday.
Rob
The Do's & Don'ts of an Engineering student.
Subscribe for more footage.
The Do's & Don'ts of an Engineering student.
Subscribe for more footage.
The Do's & Don'ts of an Engineering student.
Subscribe for more footage.
=================================
2671:Pool Cue Lock.
Used to lock a cue in a wall rack.
Shades of my misspent youth.
Lew
"Rob H." fired this volley in news:k3uabc01861 @news4.newsguy.com:
2673 golf "shag bag" for picking up balls 2674 Fuzee holder?? 2675 Diesel injector? 2676 box opener?LLoyd
Christopher A. Young Learn more about Jesus
Rob
Posting from rec.crafts.metalworking as always.
A little earlier than usual, FWIW.
2671) At a guess, this is for locking up your horse for a short time by looping his reins through the 'U' and closing the lock.It might have been at a saloon or some similar place, where there were a line of these, and either the key was left in it when not in use, or you had to go in to ask for the key.
2672) Looks like a tool for bending a hook or an elbow into either heavy wire or metal tubing. (At a guess, about 1/4 to 3/8" OD.2673) Looks like a tool for picking up and bagging golf balls, likely at a driving range. (Though I suspect that they have motorized vehicles for the purpose on a larger scale.)
In any case, the hooks on the bottom are formed to let things go through one way only, so the balls would advance up the tube and gather in the bag until it is unzipped and emptied back into a basket or the like.
2674) For holding a warning flag of some sort or the other. It can either be clamped to a tabletop or similar surface, or be stabbed ito the ground.Looks to have a release to allow the flag to lie down, or to be held up at the angle visible. I don't see any springs for pop-up operation, however.
2675) An interesting spark plug. I see eight electrodes around the outside and six at angles on the central part, which looks like it rotates in use -- perhaps to mimize carbon buildup? Certainly there must be a patent somewhere for that design. :-)Was this at the same place as the container of insulators?
2676) Tool for cutting off something fairly thin level with a surface at right angles. Perhaps for wallpaper at the junction with the floor? Or perhaps wood veneer?Now to post this, and then see what suggestions are already posted.
Enjoy, DoN.
A new set has been posted, I'm not going to be able to post the answers until Sunday.
Rob
2625 some type of a motor spark plug?2671: Leg or arm iron for securing a prisoner, if it's large enough.
2673: I think it both senses buried items (wires, pipes) and then a trigger can be pulled to spray a mark, with the end built to capture a paint can. Or, maybe it's a gas sniffer.
2674: Have no idea but looks like it can get shoved into the ground or clamp to something using either the soft end or the spiked end of the threaded rod, perhaps at an angle.2675: Don't know for what but looks like a fitting that goes into a tank that aerates or distrubutes a liguid being fed into the tank.
"Rob H." wrote in news:k3uabc01861 @news4.newsguy.com:
I'm sure someone else has already posted these answers...
2672 - Tubing bender 2673 - Don't know the name but it's used to pickup golf balls 2675 - Some kind of speciality spark plugLarry
Since it is described as being only 1-1/4" tall, that prisoner would have to be a newborn. :-)
Looking at the shape of the bottom end it is a one-way path for objects of a narrow size range -- and it looks about right for golf balls, so you push it down on golf balls as you wander the driving range, and they come up the tube and into the bag. Eventually, the bag gets full, and you go to a container, unzip the bag, and pour them into the container -- then go back out for more balls.
I suspect that it holds some kind of signal flag.
Looks to me like a patented fancy spark plug for an internal combustion engine. Proably the "fan" plate rotates to distribute spark erosion wear around the plug, so it last a lot longer than the usual one of the period.
Enjoy, DoN.
Yes, it was the same place, they had thousands of spark plugs on display, this was one of the most interesting.
All except the second have been answered correctly this week, I'm still trying to find a good reference for it and will post an update here when I get one. The answers for this set have been posted:
Rob
The wrench is used on the head saw for circular sawmills. I Couldn't find a picture of the wrench but these links show the type of inserted teeth that it is used on:
Simonds also advertises a new style wrench that with the claim: "for quick and easy bit and shank replacement - no need to fumble with the "U" shaped pin."
Thanks for the links, I didn't think to call it a wrench, I did a search on "Disston saw wrench" and found a patent for a similar tool, it can be found at this address:
I added the Simonds wrench to my answer to show a modern version of the tool. Thanks again.
Hmm ... you seem to have updated the web site, because you are showing what the tool does.
Based on the size of the tool, and the drawing, this was a very large sawblade -- from a sawmill, almost certainly. Since the handle of the tool is longer than the diameter of any circular sawblade which I have ever used -- it is not for a home hobby worker. :-)
Enjoy, DoN.
Hitl^h^h^h^h Obama Youth?
"Those Democrats will have you back in chains!"
Christopher A. Young Learn more about Jesus
Since it is described as being only 1-1/4" tall, that prisoner would have to be a newborn. :-)
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.