1. Home
  2. ⚙ Model Engineering in the UK
  3. 64ths of an inch to mlliimeters

64ths of an inch to mlliimeters

Can someone cut and paste a table showing 64th of an inch in one column and millimeters in the other to 4 decimal places?

ie

1/64 = 0.3962mm 2/64 = 0.7925mm

etc, right up to 64/64

Cannot find one on the web and trying to save myself time typing one out.

NB needs to be rounded on last decimal place. ie 2/64" = 0.79248 but was rounded to 0.7925mm.

Thanks.

Reply to
Richard
Loading thread data ...

It's easy to knock stuff like this up in Excel...

Out of intreast what values did you use to get the above results, as they do not mach mine?

64th's mm 1 0.3969 2 0.7938 3 1.1906 4 1.5875 5 1.9844 6 2.3813 7 2.7781 8 3.1750 9 3.5719 10 3.9688 11 4.3656 12 4.7625 13 5.1594 14 5.5563 15 5.9531 16 6.3500 17 6.7469 18 7.1438 19 7.5406 20 7.9375 21 8.3344 22 8.7313 23 9.1281 24 9.5250 25 9.9219 26 10.3188 27 10.7156 28 11.1125 29 11.5094 30 11.9063 31 12.3031 32 12.7000 33 13.0969 34 13.4938 35 13.8906 36 14.2875 37 14.6844 38 15.0813 39 15.4781 40 15.8750 41 16.2719 42 16.6688 43 17.0656 44 17.4625 45 17.8594 46 18.2563 47 18.6531 48 19.0500 49 19.4469 50 19.8438 51 20.2406 52 20.6375 53 21.0344 54 21.4313 55 21.8281 56 22.2250 57 22.6219 58 23.0188 59 23.4156 60 23.8125 61 24.2094 62 24.6063 63 25.0031 64 25.4000

Stephen.

Reply to
Stephen Woolhead

Thanks.

What I did was take someones decimal equivalent of 1/64th, which read

0.0156. Then I put this number into the Inches box at:

formatting link

Reply to
Richard

Which you'd have got wrong anyway as you don't appear to know how many mm there are in an inch.

Reply to
Dave Baker

I suppose that the last digit is rounded automatically by the PC, ie that the figure after the last digit would be 5 or greater in the two values given.

Reply to
Richard

Ah, the value you need is 0.015625.

Stephen.

Reply to
Stephen Woolhead

What you could really do with is Numerical Chameleon

It converts pretty much everything and runs on nearly everything:

formatting link

Reply to
Michael Fudge

Fraction IMP Dec Metric

1/64 0.0156 0.40 1/32 0.0313 0.79 3/64 0.0469 1.19 1/16 0.0625 1.59 5/64 0.0781 1.98 3/32 0.0938 2.38 7/64 0.1094 2.78 1/8 0.1250 3.18 9/64 0.1406 3.57 5/32 0.1563 3.97 11/64 0.1719 4.37 3/16 0.1875 4.76 13/64 0.2031 5.16 7/32 0.2188 5.56 15/64 0.2344 5.95 1/4 0.2500 6.35 17/64 0.2656 6.75 9/32 0.2813 7.14 19/64 0.2969 7.54 5/16 0.3125 7.94 21/64 0.3281 8.33 11/32 0.3438 8.73 23/64 0.3594 9.13 3/8 0.3750 9.53 25/64 0.3906 9.92 13/32 0.4063 10.32 27/64 0.4219 10.72 7/16 0.4375 11.11 29/64 0.4531 11.51 15/32 0.4688 11.91 31/64 0.4844 12.30 1/2 0.5000 12.70 33/64 0.5156 13.10 17/32 0.5313 13.49 35/64 0.5469 13.89 9/16 0.5625 14.29 37/64 0.5781 14.68 19/32 0.5938 15.08 39/64 0.6094 15.48 5/8 0.6250 15.88 41/64 0.6406 16.27 21/32 0.6563 16.67 43/64 0.6719 17.07 11/16 0.6875 17.46 45/64 0.7031 17.86 23/32 0.7188 18.26 47/64 0.7344 18.65 3/4 0.7500 19.05 49/64 0.7656 19.45 25/32 0.7813 19.84 51/64 0.7969 20.24 13/16 0.8125 20.64 53/64 0.8281 21.03 27/32 0.8438 21.43 55/64 0.8594 21.83 7/8 0.8750 22.23 57/64 0.8906 22.62 29/32 0.9063 23.02 59/64 0.9219 23.42 15/16 0.9375 23.81 61/64 0.9531 24.21 31/32 0.9688 24.61 63/64 0.9844 25.00 1 1 25.40
Reply to
Henry Springer
64ths Dec Inch Metric 1 0.0156 0.40 2 0.0313 0.79 3 0.0469 1.19 4 0.0625 1.59 5 0.0781 1.98 6 0.0938 2.38 7 0.1094 2.78 8 0.1250 3.18 9 0.1406 3.57 10 0.1563 3.97 11 0.1719 4.37 12 0.1875 4.76 13 0.2031 5.16 14 0.2188 5.56 15 0.2344 5.95 16 0.2500 6.35 17 0.2656 6.75 18 0.2813 7.14 19 0.2969 7.54 20 0.3125 7.94 21 0.3281 8.33 22 0.3438 8.73 23 0.3594 9.13 24 0.3750 9.53 25 0.3906 9.92 26 0.4063 10.32 27 0.4219 10.72 28 0.4375 11.11 29 0.4531 11.51 30 0.4688 11.91 31 0.4844 12.30 32 0.5000 12.70 33 0.5156 13.10 34 0.5313 13.49 35 0.5469 13.89 36 0.5625 14.29 37 0.5781 14.68 38 0.5938 15.08 39 0.6094 15.48 40 0.6250 15.88 41 0.6406 16.27 42 0.6563 16.67 43 0.6719 17.07 44 0.6875 17.46 45 0.7031 17.86 46 0.7188 18.26 47 0.7344 18.65 48 0.7500 19.05 49 0.7656 19.45 50 0.7813 19.84 51 0.7969 20.24 52 0.8125 20.64 53 0.8281 21.03 54 0.8438 21.43 55 0.8594 21.83 56 0.8750 22.23 57 0.8906 22.62 58 0.9063 23.02 59 0.9219 23.42 60 0.9375 23.81 61 0.9531 24.21 62 0.9688 24.61 63 0.9844 25.00 64 1.0000 25.40

Is this about right?

Mike

"Henry Springer" wrote in message news: snipped-for-privacy@4ax.com... On Thu, 10 Mar 2005 12:33:24 -0000, "Richard" wrote:

Fraction IMP Dec Metric

1/64 0.0156 0.40 1/32 0.0313 0.79 3/64 0.0469 1.19 1/16 0.0625 1.59 5/64 0.0781 1.98 3/32 0.0938 2.38 7/64 0.1094 2.78 1/8 0.1250 3.18 9/64 0.1406 3.57 5/32 0.1563 3.97 11/64 0.1719 4.37 3/16 0.1875 4.76 13/64 0.2031 5.16 7/32 0.2188 5.56 15/64 0.2344 5.95 1/4 0.2500 6.35 17/64 0.2656 6.75 9/32 0.2813 7.14 19/64 0.2969 7.54 5/16 0.3125 7.94 21/64 0.3281 8.33 11/32 0.3438 8.73 23/64 0.3594 9.13 3/8 0.3750 9.53 25/64 0.3906 9.92 13/32 0.4063 10.32 27/64 0.4219 10.72 7/16 0.4375 11.11 29/64 0.4531 11.51 15/32 0.4688 11.91 31/64 0.4844 12.30 1/2 0.5000 12.70 33/64 0.5156 13.10 17/32 0.5313 13.49 35/64 0.5469 13.89 9/16 0.5625 14.29 37/64 0.5781 14.68 19/32 0.5938 15.08 39/64 0.6094 15.48 5/8 0.6250 15.88 41/64 0.6406 16.27 21/32 0.6563 16.67 43/64 0.6719 17.07 11/16 0.6875 17.46 45/64 0.7031 17.86 23/32 0.7188 18.26 47/64 0.7344 18.65 3/4 0.7500 19.05 49/64 0.7656 19.45 25/32 0.7813 19.84 51/64 0.7969 20.24 13/16 0.8125 20.64 53/64 0.8281 21.03 27/32 0.8438 21.43 55/64 0.8594 21.83 7/8 0.8750 22.23 57/64 0.8906 22.62 29/32 0.9063 23.02 59/64 0.9219 23.42 15/16 0.9375 23.81 61/64 0.9531 24.21 31/32 0.9688 24.61 63/64 0.9844 25.00 1 1 25.40
Reply to
Mike D

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.