1. Home
  2. ⚙ Model Engineering in the UK
  3. Back Plate

Back Plate

Before I buy a casting and machine up a backplate I don't suppose that
anyone has a backplate with a 2" x 10tpi thread lying unloved and
unwanted in a dusty corner?
Thanks
Charles
Reply to
Charles Ping
Loading thread data ...

Further Reading

  • Jet lathe chuck back plate

  • I picked up a jet 12x40 bench lathe today. It was manufactured in 1983. It...

  • Cleaning up aluminium serial number plate

  • Hi folks,My backhoe has an aluminium serial number plate. The letters are...

  • Casting machine material

  • I am trying to build a vacuum investment casting machine for lost wax casting...

  • Lost wood casting

  • Lost wood casting I had a crack at something new today with amazing results....

  • Before I buy Leaded Steel

  • I kinda asked this question once before, and got a bunch of answers that all...

  • 4130 steel for lathe chuck backplate?

  • I want to make a backplate for a 5" Bison 4 independent jaw chuck (theone...

  • Sand casting question

  • I kinda new to this sand casting hobbie... I bought or made almosteverything I...

  • Lathe chuck back plate

  • Has any one heard of a 2 3/8 x 8 backing plate? I've seen 2 3/8 x 6 but not...

  • Machine warm up

  • We've been having trouble with inconsistent parts throughout the day.The...

  • Web site up back up

  • Greetings all . . . My meager web site is back up, having been re-hosted from...

  • Anybody seen a plate like this before

  • Gentlemen,If you go to this link there is a picture of a plate on the side of a...

  • choochooauctions.com back up!

  • choochoo is back on-line after being down for 2...

  • Surface Plate techniques

  • Put a tiny speck of prussian blue on the surface plate after a verythorough...

  • It Don't Add Up

  • Sometimes hotels/motels will do that for a reasonable price (like 2weeks free)...

  • DeskCNC user group

  • A new Yahoo group has been set up as a mutual support group for DeskCNC users....
  • « previous thread

  • Maisie

  • I am starting my first steam model and am looking for information on the maisie...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.