⚙ Model Engineering in the UK

  1. Home
  2. ⚙ Model Engineering in the UK
6651 Threads Posts
to

Worth reading in ⚙ Model Engineering in the UK

Twin-Spindle NC PCB Drill on ebay

We have put up one of the NC drilling machines from the closed factory on ebay, don't know if it would be of any intere...
2 comments posted 22yrs
posted by prepair
2 comments posted 22yrs posted by prepair

Shim for liner flange

Part of the day job at present is overhauling a Crossley BW1, 1940's 4-stroke single cylinder diesel, 5" bore with a we...
17 comments posted 22yrs
posted by timleech
17 comments posted 22yrs posted by timleech

ISO and DIN screw specs

Anyone know where I can find specs, drawings, tech info on M3 sized hex screws? I have the ISO (ISO 7380) and DIN (DIN 7...
2 comments posted 22yrs
posted by james
2 comments posted 22yrs posted by james

Regrinding R8 Clarkson Autolock to MT2

Hello all, I have a medium Clarkson Autolock chuck which has an R8 taper. Does anyone have any pointers to someone who...
0 comments posted 22yrs
posted by johnmontrosetoenails
0 comments posted 22yrs posted by johnmontrosetoenails

brass

I've got a couple of hundred pieces of brass 50mm square 4mm thick. For anyone who wants to collect. Just off J12 M1. Re...
3 comments posted 22yrs
posted by krheyes
3 comments posted 22yrs posted by krheyes

Help required - chuck backplate

Can anyone help please? Fairly recently I seem to remember reading an article on converting a chuck back plate so you c...
2 comments posted 22yrs
posted by martin.akehurst
2 comments posted 22yrs posted by martin.akehurst

Brunell Engineering

Has anyone got any experience, good or bad, of dealing with this supplier. I was interested in one of the traction engi...
8 comments posted 22yrs
posted by Kevin.Steele
8 comments posted 22yrs posted by Kevin.Steele

Brazing Hearth

I've just picked up a brazing hearth that I bought and I have a question. It's the standard type of thing, a metal tray...
3 comments posted 22yrs
posted by Kevin.Steele
3 comments posted 22yrs posted by Kevin.Steele

Cleaning a Burnerd collet chuck

I have the small size of Burnerd collet chuck (takes 1/16" to 1.5" multisize collets). It's been little used but could...
0 comments posted 22yrs
posted by fazspam
0 comments posted 22yrs posted by fazspam

Ali Channel for ramps

Posted to uk.rec.engines.stationary and uk.rec.models.engineering We are going to buy some heavy ali channel for ramps...
10 comments posted 22yrs
posted by prepair
10 comments posted 22yrs posted by prepair

Pistons and Teflon

Hello all, has anyone ever used TEFLON bar to make pistons for small steam model engines? If so,what would be the best...
15 comments posted 22yrs
posted by john.morton22
15 comments posted 22yrs posted by john.morton22

What is the tool to use?

If I want to cut holes of diameter from about 0.75 -1.5" in 3mm thick brass sheet, what kind of drill should I use? Any...
10 comments posted 22yrs
posted by useless
10 comments posted 22yrs posted by useless

Firth Brown harness tester

I was given an old Firth Brown 'Hardometer' hardness tester the other day. Sadly it has suffered from years of neglect,...
1 comments posted 22yrs
posted by timleech
1 comments posted 22yrs posted by timleech

Anodising Dyes

I'm looking for a supplier of anodising dyes here in the UK - any suggestions?
2 comments posted 22yrs
posted by james
2 comments posted 22yrs posted by james