Barleylands

Sep 11, 2005 9 Replies

Well, had a good day at Barleylands (and only got marginally damp!). A particularly good show for unusual and relatively rare engines this year. Unfortunately my Webshots seems to be playing up so until I can resolve the problems I can't post the pics. I'll let you know as soon as I fix it.



The tractor pulling (not something I'm usually over enamored with) was quite interesting this year in that in addition to the usual Chevy V8's producing several squillion horse power was an 11 cylinder radial engined device that was slightly ineffectual because he had *only* 1000 HP at his disposal and what appeared to be a Rolls Royce V10 powered thing (it definitely had 10 exhaust pipes and Rolls Royce cast into the cam covers, although being a bit green on these things I thought the RR V10 was a new BMW related thing - 600 HP that just would not cut the mustard!) Unfortunately it failed completely because he couldn't get the thing 'on cam' - a bit of a shame as I was nearly wetting myself at the prospect of it going at full chat down the runway. It has to be said that however odd the concept the of tractor pulling may be to some of us, the sound of a well tweaked, supercharged Chevy V8 chucking out well over 1000 HP at full chat and literally shaking the ground is something to behold - obviously it still doesn't compare with a Merlin on full song but pretty awesome none the less!



Pics. soon - I hope



Mark



Posted Via Usenet.com Premium Usenet Newsgroup Services



---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **



----------------------------------------------------------

formatting link


I believe that Rolls-Royce made a V10 multi fuel engine for Main Battle tanks - one of they, perhaps?

Regards,

J. Kim Siddorn,

Photo's at

formatting link
Some wonderful engines from a couple of not so humble (these days) Gardner gas engines, big Crossleys a Petter Handyman to a superb Mietz & Weiss. A possible favourite being the Reform-Motoren-Fabrik.

Mark

Some very tasty stuff indeed. Thanks for your efforts. The Petter ?M is a nice unmolested example of a late 1922 model with the rare integral starting collar/pulley. Its difficult without anything for scale but I reckon a

2.5hp. ttfn Roland

Roland,

It is a 5 hp owned by Tim Read from Norwich see a picture from earlier in the year.

formatting link

Hi Pete, The Jumbo photo at

formatting link
to scream "Fuller & Johnson" to me ! Perhaps I am Wrong?

-- Dave Croft Warrington England

formatting link

Thanks Pete, although its not 1919 unless it went back for a very major rebuild in 1922 or early 1923. The Jellymould M type near it seems to be mis-captioned as an S. Lovely job though. regards Roland

Yes, it was excellent, being as it appeared totally original as I could discern. I thought it was probably a 5HP based on the size of mine but couldn't be sure, hence the question mark.

Mark

Posted Via Usenet.com Premium Usenet Newsgroup Services

---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **

----------------------------------------------------------

formatting link

OOPS, thanks Dave, you are absolutely right, I will have to look at my pics and sort that one out, Pretty sure I know why though as I think Russell brought both his Jumbo and Fuller to the Rally and as I have a habit of taking a picture of the engine then immediately a picture of the board, I reckon I took the wrong board and did not notice when I wrote the page.

Unfortunately work has got in the way this summer, I am so far behind with the reports I reckon I will do the remaining seven at the end of the season

Hi gang, Petes picture above reminded me of the F & J that I found half buried in rust powder at a local scrap yard 20 years ago. See

formatting link
spent about a year of my life finding a mag , making a carb, tank & many other items. The flywheel rims were rusted away at the bottom so I had them turned at the Vulcan Loco works on a wheel lathe. See
formatting link
ran OK but only at a fast speed. I sold it about a year later. Does anyone think this engine still shows up anywhere? TIA

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required