RIP Keith Hatton, acidental death, much too young!
- posted
15 years ago
RIP Keith Hatton, acidental death, much too young!
On Fri, 19 Sep 2008 20:42:17 -0400, "Rob" said in :
Eep! Running accident?
Guy
Dont know, just says accident!
Tried a few times but haven't been able to log on th their site today
Seems OK now, from Canada.
Nope, tried both sites and still nothing.
All connect from up here
On Wed, 24 Sep 2008 20:26:41 GMT, "Dobbin" said in :
Working here for me, try the good ol' technical reboot.
Guy
Both working fine for me.
Try using a different browser - any of Firefox, Opera or Chrome will give a more useful error message that will help diagnose where the problem lies.
Mark
both sites WFM, Firefox 2, in .au.
On 25 Sep 2008 06:22:41 +0930, Philip said in :
Got that, Dobbin? Just turn the pea sea upside down and it will work fine :o)
Guy
Even using IE v6 or v7, in Tools> Internet Options> Advanced, in teh big scrolling box full of checkboxes, there is one in the "Browsing" section which says "Show friendly HTTP eror messages". If you disble this, you get some if not all of the information other borwsers give by default, and this should be enough to help diagnose the problem.
Of course, using a non-IE browser (especially if you still use v6) is a good idea for plenty of other reasons, but they are not worth going into here.
Tried Firefox and Firefox can't establish a connection to the server at
On Wed, 24 Sep 2008 22:03:16 GMT, "Dobbin" said in :
Sounds like a DNS issue. Recant, repent, reboot. And reboot your DSL router if you have one.
Guy
Would start by checking if other sites are available (bbc.co.uk, ms etc), then consider dns. If they are then try http://63.134.216.37/ - if that does work then it is your DNS.
Cheers, Simon
try also
Wash your mouth out with acid, Chrome, anyone with a clue will stay well away from that pile of philshing crap - well perhaps not philshing but certainly spy-malware...
"Rob" wrote
Heard today that he'd fallen (?) off a balcony whilst on holiday in Ibetha (?).
John.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.