Hiya Folks
I wonder if anybody can help me out here. I have (or should i say HAD) a Duraplane Durastik, but my nearsightedness kind of led to a bad landing ( make that a bad crash). Nothing left of the P.V.C. fuselage. Here's my dilemma...when i built it i never jotted down the measurements for the lenght of the P.V.C. fuselage or even where to locate all the holes in the PVC fuselage. The duraplane model i need measurements for is the Durastik...the red one with the german markings on it. So if one of you nice folks has a few extra minutes and could send me the measurements it would be really appreciated...BIG TIME. Total length of PVC pipe. Location (from front end) for the holes on the bottom of the fuse. Location (from front end) for the wing hold down dowel holes. Location (from front end) for the large hole on top of the PVC fuse for access to reciever area and the size of the large hole too. I know it's a lot to ask but the plane flew so well for me (except when i let it get too far away) i'd really love to rebuild it and try it again. Thank you very much in advance.
Dave Malyon snipped-for-privacy@sympatico.ca
__________________________________________________________________ Dave Malyon ICQ#: 68547077 Current ICQ status: + More ways to contact me __________________________________________________________________