Realflight G3 interlink crack

From playing with another friend's G2 version, it appears that G2 lacks a very important feature that G3 has (unless I was playing with an older version of G2). G3 has a feature which allows the ground to always be in view. This gives the flyer a reference point at all times. G2 doesn't seem to have that feature. If I'm wrong, I would appreciate a correction. My buddy said he couldn't get a "ground always" view. (deleted) <

In Real Flight G2 there is an option under the "VIEW" menu to show the ground, by default it is off. To activete it click "View" on the menu bar and look for an item that says something about "ground" (i'm sorry I don't remember the exact wording offhand), click this and a check mark should appear in front of the item. The ground will now show at all times when the sim is running. However since the ground is now allways showing you are limited in the altitude that you can fly the model.

Also, there was a lite version of G2 and I don't know if it supports the ground view option.

Hope this helps Ken

Yes. Yes. and Yes. It doesn't want for anything. The flight model is good, even better than its graphics.

New dongle crack for RealFlight G3 is available, checkout emule and p2p networks:

ed2k://|file|RealFlight.G3.Dongle.Emulator-lz0.rar|201920|57B4C4F5276AE7FF75027E95F5143921|/

hi buddy,, could you just tell me how to get the program started... as i have downloaded, installed... and now its asking for the interlink serial and the program serial which i do not have..

please help..

hope to hear from you soon...

reagards ankan

b> New dongle crack for RealFlight G3 is available, checkout emule and p2p > networks:

ed2k://|file|RealFlight.G3.Dongle.Emulator-lz0.rar|201920|57B4C4F5276AE7FF75027E95F5143921|/

Why anyone would go to this much trouble for that sorry assed program is beyond my ability to comprehend.

Ed Cregger

ed2k://|file|RealFlight.G3.Dongle.Emulator-lz0.rar|201920|57B4C4F5276AE7FF75027E95F5143921|/

Stoop a bit lower Ed ...... Maybe you get it then ......

Couldn't resist :eek

-- indoruwe

----------------------------------------------------------------------- indoruwet's Profile:

Yeah, everybody who's plunked down their hard earned cash for it has a serial number.

I have the serial number.

"The OTHER Kevin in San Diego" wrote in message news: snipped-for-privacy@4ax.com...

Me too. Got 'em for all 5 G2 addons as well.. :)

"The OTHER Kevin in San Diego" wrote in message news: snipped-for-privacy@4ax.com...

Don't brag. Your stickers will fall off eventually and you'll be as screwed me!

Ed Cregger

lol! I actually took a Sharpie and scribbled 'em right on the jewelcases *AND* the CDs themselves. Learned that lesson the hard way when I lost the jewel case to my bookkeeping software and couldn't reinstall it.. Had the CD, but not the case with the cd-key sticker on it.

Why not just photocopy them and put the copies in with your importand household docs.

Scraping them off will be a problem if you ever want to sell them later on

Why would I want to scrape off the serial numbers if I sold the software? Besides, Sharpie markers are easily erased with a little isopropyl alcohol and a paper towel.

Sorry I didn't realise a sharpie was a pen, (It's a US brand) I thought you were taking them off with a scapel type blade

So if I have this dongle emulator can I run G3 with my TX ? I have the G3 disk but no controller to use with it. Please let me know. I guess I would need to buy a JR (DX6) to USB trainer cable???

This would be real cool...

Sorry, Charlie, no cigar. You need the G3 controller.

Harlan

| Sorry, Charlie, no cigar. You need the G3 controller.

... or the RFG3 emulator (and some sort of adapter for your TX.)

Yes, an RFG3 interlink emulator exists. What it does is makes a joystick device (be it a joystick, joypad, R/C controller with a USB or gameport connection, etc.) visible by the computer also look just like a RFG3 Interlink controller, so RFG3 will use it.

It really has two purposes ... 1) allow people to use controllers other than their Interlink controller with RFG3, and 2) as a `crack' for RFG3, so copies can be used by those who don't own the Interlink controller at all.

| > So if I have this dongle emulator can I run G3 with my TX ? I have the | > G3 disk but no controller to use with it. Please let me know. I guess I | > would need to buy a JR (DX6) to USB trainer cable???

I don't know about the DX6, but I do know that there are adapters that will connect your R/C TX to your computer via the USB port and the trainer plug. Like this one --

Cool man I just orderd that thing from that link you have posted....

hope it works.

Thank you for your time and I also want to thank you for your help.

Mik

-- myrddin6

----------------------------------------------------------------------- myrddin64's Profile:

I just bought an Esky Silmulator on ebay. The controller works fine wit

G3 as long as you have an emulator. payed $24 for it ! YA

-- Helder2

----------------------------------------------------------------------- Helder22's Profile: