1. Home
  2. AutoCAD discussions
  3. need drawing

need drawing

I'm designing a kitchen with an aga cooker. Does anyone have a drawing of an
aga or could direct me to find one
Many thanks
Reply to
Gerry
Loading thread data ...
I don't know if this will help but you can find the dimensions of the units here:
formatting link
I didn't see any d/l'able cad files though, but if you don't need a high level of detail you could draw it pretty quickly.
HTH,
Michael (LS)
Reply to
Michael (LS)

Further Reading

  • Does anyone have or use this ... Henrob 2000-welder

  • I was looking at this today. I am just getting starting in blacksmithing and...

  • Does anyone have the new Atlas N-scale Shay?

  • Have any of you tried out the new 2-truck Shay yet?It's only a matter of...

  • ZENA welders <- anyone have experience with this equipment ?

  • I was thinking it might have some use, but on further reflection I'm not so...

  • Anyone have a Rapidor?

  • I have just invested in an old Rapidor power hacksaw (one that takes14" blades),...

  • Does anyone have a car battery charger that you ACTUALLY LIKE

  • Does it do deep cycle batteries also? Also, does it properly handle situations...

  • Help with old MIG200 from AGA Arcweld sweden

  • Help with old MIG200 from AGA Arcweld swedenHi i have an old MIG200 semi...

  • Anyone have spares for Elliot Sturdimill?

  • I've just taken delivery of a Sturdimill 1250, but it arrived without a...

  • Does anyone here have Comcast?

  • I sometimes fall fast asleep when I am machining but I have never been filmed...

  • Re: need help with drawing

  • From TPI 33923:Description:The system parameter "Model_name" does not show the...

  • Anyone need Hardinge 4C collets?

  • I?m looking for C4 collets if you still have a line on them. I need a set but...

  • Designing with tubes

  • Hello,I'm edsigning a part which is essentially a big hollow tube with...

  • Does anyone have an extra auto helmet

  • Does anyone have an extra auto helmet they want to sell?Unexpected problems and...

  • Anyone have dellings with James Leverton

  • Does anyone know or have had dealings with:James Leverton8402 E. Hawthorne...

  • Does anyone have a German Engine contact?

  • My Australian engine friend has found this early German water pump &would like...

  • Does anyone know this old metal shaper?

  • Hallo, I'm an italian hobby machinist and i have this old metalshaper....

  • Converting 2D Drawings to 3D

  • I have a number of 2D Autocad Topographical Survey Drawings that require...
  • « previous thread

  • AutoCAD 2002 drawing text to Excel 2000 spread sheet?

  • Anyone know of a way to import AutoCAD text into Excel? I've tried some of the...
  • next thread »

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.