SW and multiple cores

Ah, yes, this is why I love this place. Clueless fucks can say whatever they like without any evidence whatsoever.

It really depends on the types of models you make. Drawings and assemblies are becoming more mtil-threaded every release. I've heard one of these people that Bangqueer quotes all the time say that surface models and multibodies make good use of multiprocessors.

Daisy

Which is why you have to resort to posting with numerous aliases.

ROTFLMFAO

Jon Banquer San Diego,CA

[ Franco Folini

UPDATE -- July 8, 2007 -- I had to close this blog post to further comments and to remove the personal attacks between Jon and some other newsgroups readers. Before the interview, I made an agreement with Jon about the style of the interview and the way to handle it. Jon didn't respect our agreement, posting comments under fake names. Jon's authentic and fake comments are all posted from the same IP address,

72.199.251.224. I can now see that my trust in Jon was misplaced. ]

Just some of the numerous bandqueer aliases;

snipped-for-privacy@yahoo.com Topdownbydesign OS Noir Frank Booth, jr dominantjon Mr.X jbtech Clinton Upyers Haywood Jablowme Normand Blais snipped-for-privacy@yahoo.com snipped-for-privacy@connix.com snipped-for-privacy@yahoo.com snipped-for-privacy@yahoo.com snipped-for-privacy@yahoo.com Brian Winters Johnny Stevenson Joe789 J0e788 Former Heavy Industries Employee donl517 James Jessup snipped-for-privacy@aol.com Troll Killer Mr. Stan Nowicki snipped-for-privacy@my-deja.com

Is a CADCAM salesman. Imagine someone getting even with a CADCAM salesman instead of being taken advantage of one. See your quotes below that show how stupid you are, Brewer.

ROTFLMFAO

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA

Was it a CADCAM salesmen like Folini who sold you Artisan, Brewer? I got a free interview. You got taken for a costly ride. It wasn't the first time, Brewer and it sure won't be the last time, sucker.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA

Jon,

Folini treated you honestly and fairly Jon, his mistake was trusting Jon Banquer to do the same.

Tom

How do you know this, Brewer? You have no idea what went down between Folini and myself. What we do know is your track record shows you to be a complete idiot.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA

Jon,

So now some 6+ months down the road, you JUST NOW are implying that Folini has not been honest in his dealings with you?

If it is true why are you just now bringing it up?

Me thinks you are being disingenuous.....as usual....there Mr. Jon-the-donk.

Tom

Only an idiot like you, Brewer would not see Folini for what he is... a cadcam salesman.

Only and idiot like you, Brewer failed to notice that Folini claimed Italians make the most powerful racing engines and my response to his rubbish.

Face it Brewer, you're a clueless Usenet stalker who makes tons of mistakes. Get a life asshole. It's not my job to educate a dumb ass like you or even get you up to speed.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA

Who gives a shit Jon, what does this have to do with your lying to the man and then lying repeatedly about why you did it?

Tom

No one gives a shit about what your stalking nonsense and your lies, Brewer. Same goes with you mentor Cliff Huprich.

Hope this helps,

Jon Banquer San Diego, CA

What lies Jon? I keep asking you to prove your accusation by posting specific examples but you haven't been able to.

The only person proven to lie is you Jon.

Tom

Now it's correct, Brewer.

Jon Banquer San Diego,CA

No Jon, nothing correct about it, its just another of your forgeries.

Tom

who must rely on propaganda techniques.

Now it's correct, Brewer

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA

Jon Banquer San Diego, CA

who must rely on propaganda techniques.

Common Jonnie, your forgeries are really getting to be old hat. Don't you have some fresh material. Tell us about how your childhood gave you your obsessions with crack w***es and sodomy.

gk

hat. You need

Now it's correct, Nuts son.

Jon Banquer San Diego, CA

hat. You need

Funny you playing the victim Jon but here you are right back to forging posts.

Tom

Now it's correct.

Here are some examples of just how dumb and stupid you often are, Brewer.

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong decision in spite of what you said. There have been a number of times that my Wife has told me to be careful in dealing with someone and after words says "I told you so". She earned the right to say it as well as you have earned the right to say I TOLD YOU SO. I made a decision that went against my better judgment and as usual it turned out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are what I want and/ or need."... Tom Brewer who can't follow his own advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet staking games, lie on a repeated basis and suffer no consequences for doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is in your mouth and your head is in your ass."... Tom Brewer admitting what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with or accept the kind of change that occurs in the cadcam market... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage of CNC machinists here... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped anyone with specific SolidWorks answers. Someone who is not able to answer any questions that "Vinny" had on master modeling or skeletal modeling. Someone who has never posted any models they have done... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I hate it!" type of comment ... now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25 SolidWorks course covers subjects / topics that the $650 SolidWorks course didn't that you're now somehow an idiot and got screwed when you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was tongue in cheek. What you could not see is that when I was typing that I was laughing to myself. Anyone that uses SmartCam and Solid Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and yet the record shows Tom Brewer thinks SmartCAM does indeed have user interface problems:

"The only real problem that I run into is that the screen can get cluttered and it becomes difficult to pick and choose elements in Free Form. I just use the utility masking feature to hide what is in the way, that cures the problem but it does add work (I tried the snap filtering and snap options but for me it was not the best way), I have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is someone who knows more and more about less and less until he knows absolutely everything about nothing.

Jon Banquer San Diego, CA