hello!
i am new to metalworking so i have a question... what do i need to weld small brass pieces?
thanks!
hello!
i am new to metalworking so i have a question... what do i need to weld small brass pieces?
thanks!
On Sun, 15 Jun 2008 22:55:14 +0200, with neither quill nor qualm, "chip9munk" quickly quoth:
On the wee small possibility that you're not an out-of-school troll, you'll need an oxy/acetyline torch setup and some brazing rod, plus various holders, flux, brushes, and cleaners.
-- Besides the noble art of getting things done, there is a nobler art of leaving things undone. The wisdom of life consists in the elimination of nonessentials. -- Lin Yutang
Must you WELD them together? There are many "silver solders" that melt well below the melting point of most brasses. They can produce pretty strong joints. If the parts weigh only a few ounces, you might get away with a propane bottle torch (hardware store variety) and some low temp silver solder. You will, of course need flux and a way to clean the surfaces to be joined very well. You should google "silver soldering" and look around. You will find plenty of info.
Pete Stanaitis
-------------------
chip9munk wrote:
Big questions - strength and color... What is it used for ?
Silver solder is strong but often silver or copper/silver.
Might try plummer phosphor/Bronze which is auto fluxing and propane or a little hotter would do small items.
You would likely need propane/oxygen for professional grade brazing rod. The plumbing stuff can be had at hardware stores -- used on air conditioning.
Martin
Mart> Must you WELD them together? There are many "silver solders" that melt
----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==----
---= - Total Privacy via Encryption =---
Ok thanks, I'll look that up! no need for actuall welding... i am working on some steampunk models, so i will need some method to join some pieces together..
thank you all for your answers!
For small pieces, you can use a soldering iron. Look for a high wattage iron of the type used for stained glass work.
Oh good lord the steampunkers have found RCM, you guys thought the spammers were bad ... ;)
Hey, what're you making? My personal favorite so far is the victorian monitor/pc case with the old-typewriter keyboard.
Dave
is the link then strong enough... i want it to last... and not to brake as soon as it is touched..
i am new to it so i am still collecting materials... i made an old-typewriter keyboard for practice... now i want to buy all the neccesary tools to make what ever comes to mind...
if you are interested... check this guy out
The word is "break" I'd normally not be so pedantic except that when I see the word "brake", my mind takes a totally different path than it should...
Back to the question. Use "hard" solder and acid flux. Clean all the flux real good after you're done.
You should not use the solder joint to transmit force. It should only be used to stick the parts together. Use a pin or screw or bends in the metal to lock them together then solder.
Very cool. Not sure how many of the guys here have heard of 'steampunk', but if they look they'll appreciate the metalwork in that one.
Dave
ups, sorry! ;)
ok, thanks!!
The words are "really well". Congratulations though on knowing how to spell "you're".
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.