I was thinking of building my own aquarium stand, using 1.25" square tube .110 wall thickness
I would do a top / bottom complete frame which would be supported by 6 legs, 2 on each end 2 in the center, plus angled pieces on the top corners as well as back / front supports....
Anyone have any idea what kind of weight this would support? final size would be 85 1/4"l x 24"w x 32"h
From what i have seen most of these stands are just made with 1 1/4" .100 angles.
Thanks
I'd suggest using more leg sets since, if your tank's top would be at ~ 6' off the floor, the filled tank would be 2,700+ lbs.
By using leg pairs 2' from each end you'd spread out the weight better and provide anchor points for shelving.
Here's hoping that your floor will stand the weight!
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.