⏣ General Metalworking

30778 Threads Posts
to

Advice Please: Cutting Brass Strips

I have some K & S "shim brass" sheets. The kind you get from a hobby shop. I need to cut it into thin strips and don't...
10 comments posted 22yrs
posted by Searcher7
10 comments posted 22yrs posted by Searcher7

Soldering Stranded Insulated Wire to Brass

I have some 18 gauge insulated "7 strand" leads that have to be soldered to small flat strips of .015" brass that are a...
8 comments posted 22yrs
posted by Searcher7
8 comments posted 22yrs posted by Searcher7

Tips on Using Thin Slitting Saws?

I had to cut a thin slit part way along an aluminum tube, roughly 1/8" thick. I tried cutting a shallow slot along the...
4 comments posted 22yrs
posted by gwhite
4 comments posted 22yrs posted by gwhite

Need bearing source

Looking for a source for low speed bearings. Really don't care what type, a bushing would even work. The specific size...
7 comments posted 22yrs
posted by gears_23NS
7 comments posted 22yrs posted by gears_23NS

Will a carbide burr cut rock?

I've a hankering to date my work by carving "MMIV" in characters about 2-1/2" tall into a flat rock surface in a garden...
20 comments posted 22yrs
posted by jwisnia
20 comments posted 22yrs posted by jwisnia

Wye or Delta config for rotary converter

I recently aquired a 3 phase GE 10hp motor to act as a rotary converter. It is a twelve lead motor than can be wired fo...
2 comments posted 22yrs
posted by gradstdnt_99
2 comments posted 22yrs posted by gradstdnt_99

cutting clock gears

I have been reading a book on building a clock. The gears are 42DP Three gears are required, 84,90 and 96 teeth. Where...
11 comments posted 22yrs
posted by cas
11 comments posted 22yrs posted by cas

nichols milling machine?

Hello, I am thinking of getting a Nichols off ebay. The seller is relatively close and is willing to deliver, and the p...
12 comments posted 22yrs
posted by hgates
12 comments posted 22yrs posted by hgates

Grinder / Buffer

I see HF has their 3/4 hp bench grinder/buffer on sale. This is the one with the buffer wheel on one side, and the grin...
0 comments posted 22yrs
posted by wrace
0 comments posted 22yrs posted by wrace

using a dividing head

I recently bought a dividing head and in an effort to understand how to use it I went through an example to make a gear...
9 comments posted 22yrs
posted by cas
9 comments posted 22yrs posted by cas

500rpm air drill

greets all, recently picked up an air drill at homedepot, the husky brand.. seems pretty solid / well-made.. and it spi...
12 comments posted 22yrs
posted by antoniogatta
12 comments posted 22yrs posted by antoniogatta

Looking for Parts for Shenwai Lathe

Anyone know of a parts machine or a source for parts for a Shenwai lathe like this one: http://cgi.ebay.com/ws/eBayISAP...
0 comments posted 22yrs
posted by escarcegaNOSPAM
0 comments posted 22yrs posted by escarcegaNOSPAM

Advice in Drilling into a Stainless Steel Wall

I have been tasked with drilling a number of 1/2" diameter holes into a 1/2" thick stainless steel wall. Any recommendat...
13 comments posted 22yrs
posted by awiggins
13 comments posted 22yrs posted by awiggins

Which ebay sniping program do you use?

Do you snipe on ebay? Do you use a program? Which one? Why? Please e mail me, so as not to post OT here in the group. St...
77 comments posted 22yrs
posted by desertNOtravelerSPAM
77 comments posted 22yrs posted by desertNOtravelerSPAM