⏣ General Metalworking

30779 Threads Posts
to

Surface grinders(possible FS)

Ok, here is the situation. I currently have a Harig 6x12 surface grinder. It is functional and does what it needs to do...
6 comments posted 23yrs
posted by cyberzl1
6 comments posted 23yrs posted by cyberzl1

Where to buy 12 inch flywheel

Hi, gang! For the ultracapcitor series of bicycles, I am equipping one with mechanical flywheel. The seat and top tubes...
9 comments posted 23yrs
posted by dgoncz
9 comments posted 23yrs posted by dgoncz

Need some help with corner rounding mills

What is the secret of these things. I just burned up a 1/2" HSS mill. Do you run at them at RPM for the inside diameter...
3 comments posted 23yrs
posted by gashmore
3 comments posted 23yrs posted by gashmore

Test: Diary of an Experimental Machinist

Test of asynchronous crosspost with sci.physics. To be read with Google Groups. Yours, Doug Goncz (at aol dot com) Repl...
0 comments posted 23yrs
posted by dgoncz
0 comments posted 23yrs posted by dgoncz

Dremal tool speed control

I was at the bird shop to get my birds nails trimmed. The lady had a Dremal tool plugged into a sewing machine restate...
25 comments posted 23yrs
posted by cuezilla
25 comments posted 23yrs posted by cuezilla

One way to deal with ebay rip-off auctions!

A member of the CCED list posted that someone appeared to have ripped off his entire web page detailing his mods to the...
10 comments posted 23yrs
posted by janders
10 comments posted 23yrs posted by janders

Cabin Fever Expo (updated 20 Nov 2003)

A reminder. (Updated 20 Nov 2003) Cabin Fever Expo January 17-18, 2004 York Expo Center York, Pennsylvania http://logan...
3 comments posted 23yrs
posted by ssl
3 comments posted 23yrs posted by ssl

OT-Glad it's not my project

The folks across the street are redoing their garage door that has a drain trough in front. On Monday morning they star...
5 comments posted 23yrs
posted by spamless
5 comments posted 23yrs posted by spamless

Rehardening a grade 5 or 8 bolt after annealed

I heated a grade 5 or 8 bolt up to dull red so I could machine it easier and now I would like to reharden. What temps do...
6 comments posted 23yrs
posted by d-seidel
6 comments posted 23yrs posted by d-seidel

Poison it!

"Poison it!" my machinist mentor used to say, making reference to case hardening using compounds that used to contain c...
1 comments posted 23yrs
posted by nodamned
1 comments posted 23yrs posted by nodamned

AC to DC

Several days ago I bought a Bodine gearmotor on Ebay to use for a power feed on my mill. When it arrived I found I'd be...
13 comments posted 23yrs
posted by engineman1
13 comments posted 23yrs posted by engineman1

grunder

Does anyone know who rebuilds Taft Pierce surface grinders or at lease who can regrind the ways ?Ray Mueller
0 comments posted 23yrs
posted by smuel10363
0 comments posted 23yrs posted by smuel10363

FA: Jacobs Headstock Chuck for 1-1/2x8 Spindle

This is a beautiful chuck, but I have a 2-1/4x8 spindle nose. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2574817...
0 comments posted 23yrs
posted by wallyblackburn
0 comments posted 23yrs posted by wallyblackburn

cutting plexiglass sheets

i can get some 1/8 or 1/4 inch plexiglas sheets at the hardare store and cut them to the desired sizes needed.. what ca...
19 comments posted 23yrs
posted by jim
19 comments posted 23yrs posted by jim

Which Lathe for Beginner?

I'm wondering what brand and model of lathe and milling machines someone starting out should consider? I want to make p...
30 comments posted 23yrs
posted by freeagent
30 comments posted 23yrs posted by freeagent