Bigger stuff ..

• Reducing steel rod diameter

• The hole is 0.41 inch, and can't be altered. I need to have a sliding fit...

• 8018 on mild steel

• Hi,Is there any problem using 8018 1/8 on mild steel in a pinch. ...

• Welding Stainless Steel with Mild Steel Wire

• Hi,I need to weld a threaded boss into a car exhaust system for an O2 sensor....

• Porosity in mild steel using TIG

• Use straight Argon....Mild Steel needs the filler metal too otherwise youwill...

• Welding cast steel to mild steel plate.

• Is it ok to weld cast steel to mild steel plate? If so, what sort of rodshould I...

• Ground steel discs

• Any ideas as to where I might source a quantity of such things, around50mm...

• text around diameter

• Using WF 4.0...need to make a label to wrap around the cylinder of another part....

• Best rod for overhead welding QT100 and mild steel.

• Hi,I'm wondering what would be the best rod to use for overhead welding of...

• Welding Between Grade S460 & S355 mild steel

• Dear Sir,Anyone can advice on the following queries will be highly...

• 4 inch diameter bolts

• I have two taps that are 4"-4 taps (that is, for four inch diameter bolts with...

• Sorting discs by weight

• I'd like to sort a large quantity of disks by weight. They're 0.75"...

• TIG welding 304 stainless to mild steel

• Is 310 SS rod suitable for welding 304 SS to mild steel?

• Attach Rotary Table Vertically to Mini-Lathe?

• ...An earlier post ref'ed a webpage with Robert Bastow's commentson...

• more threads or bigger diameter?

• whats better for strength? i have four fasteners to choose...

• keyways

• consider a gear on a shaft, with a square key. Cutting the keyway on the shft is...
• « previous thread

• Metal for milling spindle?

• Now that the stepper controlled dividing head (qv) is commissioned I need to...
• next thread »