Can you airbrusch modelmaster metalizer paints using a fine-tip airbrush or are the metal bits in the paint gonna do some damage?
- posted
20 years ago
Can you airbrusch modelmaster metalizer paints using a fine-tip airbrush or are the metal bits in the paint gonna do some damage?
No damage, but in my experience metalized paints usually don't spray evenly through a .2 mm tip, and need a higher air pressure, around 32-35 PSI, which in turn makes laying wet coats a bit difficult. With the Aztek, I use either the general purpose gray nozzle (.3mm) or the blue hi-flow (.4mm), and the medium tip with the Badger.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.