Modelkasten SK-1 Tiger TRacks

OK, I am baffled... anyone know where I can get instructions for these tracks? I have no clue how to put them together... Please?

Help-!

Reply to
Lance Mertz
Loading thread data ...

I'm not familiar with the SK-1 workable Tiger tracks, but if they're anything like the other sets there should be a number of fork-shaped sprues with bolts on their tips (probably two on each) in the box. If so, put three track-links against (or "into") each other so that the tiny holes on the sides align, then take two of the "forks" and *care- fully* apply some glue (preferably liquid) to the thicker end of the bolts (not the tips!) while they're still attached to the sprue, and insert them into the holes -- two on each side of the tracks. When you think the glue has dried *carefully* wiggle the sprue up and down so they snap off leaving them attached to the tracks. Then add another couple of track links on one of the ends and repeat.

There's a great deal of trial and failure involved to get it right ...

... And if you have a lot of patience you also may want to drill out the track links and add a piece of wire so the links won't be quite so fragile ...

(Sorry I can't be of any more help.)

(Oh, and my advice for anyone who may want to try out the workable Modelkasten tracks would be to buy some of the cheaper sets with contains just a few tracks intended to be used as spares attached on the sides of the hull or turret ... )

Reply to
John Magne Stubsveen

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.