center of mass


In a sketch, is it possible to mate the center of a circle around the
centroid of a selected body?
Reply to
Walms
Loading thread data ...
"Walms" wrote in news:dilKa.247 $ snipped-for-privacy@news20.bellglobal.com:
Sure. Use one of the macros that makes a 3D sketch point at the CG of a part, and then make a plane and a circle related to that.
macros at this site:
formatting link
matt.
Reply to
matt
matt wrote in news:Xns93A5925F7B0DAmnet@ 66.133.130.30:
Realizing it won't be parametric. If you modify the sketch you will need to generate a new point, etc.
Reply to
Joel Moore
Excellent! Thanks so much!
Reply to
Walms
Joel Moore wrote in news:Xns93A597FD4DC01asdsadfgasdgadsa@130.81.64.196:
If the macro is used in a macro feature, the 3D sketch point would be parametric and update with changes to the part.
Reply to
matt

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.