Detail breakout lines

We have a client used to dealing with paper drawings.

It used to be normal to draw breakout detail views inside a squiggly lined perimeter.

Does Solidworks do this?

Is there an ANSI standard we can quote to the client that does not allow this for modern CAD drawings?

Reply to
Phil Evans
Loading thread data ...

yes insert, drawing view, broken out section

not sure

Reply to
kenneth

When you follow these instructions, you will then draw in a spline that becomes the edge of the broken out view, then OK.

Matt Lorono

formatting link
of
formatting link

Reply to
fcsuper

Hi Matt, unfortunately all the views are created and fully dimensioned. Can the current detail view be modified to show the splined breakout or does it need to be recreated?

From what I see they all need to be recreated.

Phil

Reply to
Phil Evans

Matt is confused. He is starting to talk like bob z. because of this. He asks, "how does a view being fully dimensioned affect whether or not it can have broken out section added to it?". He's wondering if you aren't actually talking about detail views? He knows that these are not called breakout views, and that detail views and broken out views (not breakout) are different beasts in drafting a drawing.

Woh, what just happened to me? Sorry about that. Musta been something I ate for breakfast. So, if you are talking about detail view, you simply draw a circle around the area you want detailed and create a detailed view instead of a broken out section. It won't have squiggly lines for a view edge, but rather just a circle along the area of the part which is cut for the view. Squiggly lines are for broken out views that appear directly in the parent view and not in a separate spot on the sheet.

Am I understanding your question?

Matt Lorono

formatting link
of
formatting link

Reply to
fcsuper

Thats it exactly. It would seem I have confused you by mixing the Solidworks term "breakout section" and the old drafting term "breakout detail view" I want to convert Solidworks detail views, the ones with a nice circular periphery to have a jagged line periphery as was shown in the old drafting term "breakout detail view"

I suspect this is not possible.

Reply to
Phil Evans

Yes, it's possible.

Activate view from which detail is to be generated from. Sketch spline around area to be detailed. Select spline sketch, then select detail view. In FM, change Style; No Leader & use Profile instead of Circle

Reply to
kenneth

I missed the "convert". Not possible to "convert" existing views.

Reply to
kenneth

Reply to
esobota

That worked, thanks

Reply to
Phil Evans

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.