I (or rather my children) have a Hornby DCC railway set. You'd thinkthis would be ideal for controlling from a computer, but it appearsto be rather expensive...The "Select" controller provided with the set has an RJ-12 socket forconnecting to other controllers, and apparently uses XPressNet, whichruns over RS-485. The "Elite" controller, which has a USB port, costsabout 150 pounds.The computer I'm planning to use (a Mac) doesn't have a serial port,and USB-to-RS-485 converters appear to also be ridiculously expensive.Furthermore, the JMRI website implies that the connector on the"Select" may not be fully compatible with other manufacturers'equipment.Is there a cheaper solution? Are there reasonably-priced compatiblecontrollers from other manufacturers?As for software, it appears that JMRI might work, but I wouldn't mindwriting my own.-- Richard

why not go usb > rs232 then rs232 > rs 485usb to rs232 are cheap (2-3 quid on ebay)rs 232 to rs 485 are also on ebay for around a fiverAndy

Controlling DCC from computer?

T

turbo 16 years ago

Trust you will find time , MBQ, to visit us at Stafford annual exhibition.. Stafford Railway Circle's annual exhibition takes place over the weekend of

6th & 7th February at The Stafford County Showground, Weston Road, Stafford, ST18 0BD. A full list of the layouts and traders attending can be found at

formatting link

free bus service which operated last year (between Stafford railway station and the Showground)will be running again - details of times can be found at

formatting link

Vote

S

simon 16 years ago

Cheers, Simon

Vote

C

cjlangdon 16 years ago

This has NOT been my expereince. I have been a member for nearly 20 years and MERG gives good value for maony. MERG offers a great deal of help for those who wish to use and understand electronics to improve the realistic operation of their model railways. How else would their membership increase every year?

Vote

S

simon 16 years ago

This has NOT been my expereince. I have been a member for nearly 20 years and MERG gives good value for maony. MERG offers a great deal of help for those who wish to use and understand electronics to improve the realistic operation of their model railways. How else would their membership increase every year? ==============================

Forgive me for pointing out the obvious but if you've been a member for nearly 20 years then it wouldnt be your experience :-)

Cheers, Simon

Vote

Controlling DCC from computer?

Join the Discussion

Didn't find your answer?