Thunder Tiger SSR does not move?

hello, my thunder tiger SSR starts and revs up ok but the car does not move.

the weels are free of any restrictions and all the cogs/cams spin when the revs rise but the wheels do not spin

any ideas what could be wrong?

Reply to
Daljit Singh Dhaliwal
Loading thread data ...

It obviously needs wings to be part of rec.models.rc.AIR.

Try red bull in the tank.

Reply to
The Natural Philosopher

On Mon, 17 Sep 2007 02:34:05 -0700, Daljit Singh Dhaliwal wrote in :

Broken or missing gear somewhere.

Take it back for warranty repair, replacement, or refund.

Marty

Reply to
Martin X. Moleski, SJ

Download manual

formatting link
"all the cogs/cams spin when the revs rise but the wheels do not spin" indicates the clutch is functioning. Most common fault is a loose grub screw.on one of the drive dogs- check all. Otherwise, check whether the main shaft is driving, if not = fault in center 2 speed gear unit - clean the one way bearing or a broken gear in differential. regards Alan T. Alan's Hobby, Model & RC FAQ Web Links
formatting link

Reply to
A.T.

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.