1. Home
  2. 🔒 Lockmithing and Lockpicking Discussions
  3. help me choose good lock

help me choose good lock

Hallo, I'm from Poland and I have a problem with choosing a lock-cylinder. In Poland we have not many locks you write about - modeco, fichet, corbin emhart, schlage etc. I was looking in shops and I found those ones: KABA quattro S, EVVA

3KS, EVVA DPI, EVVA Dual, ABUS EC850, KESO 2000, Abloy Disklock Pro, Abloy Protec, ASSA 6000-7000 and that's all. Most of then are described here:
formatting link
I realize that there is not unpicable lock but I want to choose quite good not to allow enter my home for thief. Thanks in advance Adam
Reply to
Adam
Loading thread data ...

In article snipped-for-privacy@posting.google.com>, Adam snipped-for-privacy@klub.chip.pl> writes

I am looking at cylinders for my own property and so have looked at a few of those you mention.

My preference would be the ASSA 7000, 6pins + sidebar, narrow keyway, drill resistant and anti-pull. Proven pedigree & no gimmicks.

Is this a eurocylinder? Be aware that they are vulnerable to physical attack but this can be reduced if you fit a security escutcheon fixed through the door. Make sure that cylinder does not protrude more than a couple of mm from the door or escutcheon if fitted.

If you can get an Abus XP10 I would recommend it, but not the EC850.

Hope that helps

Reply to
fred

In article snipped-for-privacy@y.z, fred snipped-for-privacy@for.mail writes

Sorry to follow up on my own post, but just found some more info on Evva and the Dual looks like a v tough cylinder with some nice features so that would be another one for the list.

Reply to
fred

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.