Busted drafting machine!

replying to steamer, Jack wrote: There is hole about 1/8 in diameter in the black pivot casting. To hold the adjusting nut, insert a rod into this hole while turning the arm length
adjuster. Otherwise, the nut will turn freely in the socket. This arrangement is to prevent accidental adjustment of the arms while the drafting machine is in use.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
Add image file

Polytechforum.com is a website by engineers for engineers. It is not affiliated with any of manufacturers or vendors discussed here. All logos and trade names are the property of their respective owners.