Looks like a very useful kit. Installation was very straightforward, I did not realize how similar all Bridgeport heads are. Based on some first impressions, it is a very accurate device.
- posted
16 years ago
Looks like a very useful kit. Installation was very straightforward, I did not realize how similar all Bridgeport heads are. Based on some first impressions, it is a very accurate device.
They are very handy. Have them at work. Someday I'll have one at home.
Wes
-- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller
They are not even very expensive new from dealers. I bought one at a liquidation, for somewhat less than new price, but even a new price is totally reasonable ($182 or so).
i
I think that it is useful apart of a three axis DRO. The DRO Z axis measures table position, but this measures quill position, like drilling depth etc.
I have a 3 axis DRO that I will install soon, hopefully.
i
--Looks like it might interfere with one of those spring-clamp depth stops. Do they still fit?
It does interfere with depth stops. I moved them all the way to the bottom. I do not feel that I need them, with this readout.
isteamer sez:: " --Looks like it might interfere with one of those spring-clamp depth stops. Do they still fit?"
Yep ! If you're talking about the mico-graduated round nut that slips up and down via a quick release push button --- I have both on my 1990 model, 10 x 54, Comet mill.
Bob Swinney
"steamer" wrote in message news:47e6779c$0$36345$ snipped-for-privacy@news.sonic.net...
As a low dollar type, I bought (actually had my wife buy it for Christamas a few years ago) a $30 kit for mounting a 6 inch caliper to do the same as the function as the Mitutoyo quill kit. One of the nice features is that the caliper is held in place with several thumb screws and can be removed quickly if needed elsewhere. I do not remember who sold the kit, MSC, Enco or similar.
down via a quick
One more thing I don't have and want badly. Maybe I should change my handle to Too_Few_Tooling_Dollars? :)
Wes
-- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller
down via a quick
It is about $20 at McMaster...
i
But the one I want is 41 bucks.
-- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.