OT need help choosing a tractor

Jun 11, 2004 5 Replies
Jump to replies (5)

This is only related to metalworking due to the welding project that this tractor purchase is going to lead to. Last week I bought a heavy duty loader at an auction (just the loader). It is built for a 4wd tractor of 50-90 hp a Case 1390 actually. I don't need such a powerful tractor or 4wd, I just want to put logs on my bandsaw mill every once in a while and blow some snow. I am pretty handy with a welder and should be able to make this loader fit whatever I buy. I would prefer a gas engine as they are easier to start in the winter up here in Canada. Can anyone recommend what model of tractor I should look for. I want power steering, a heavy front axel and a 3pt hitch for the blower. Cheap is good, I like to fix things and don't need this tractor as a status symbol.



Any advice from the farmers among you would be appreciated.



stan



Case 800 with after market wide front end (Schultz or something like that). IH 544 or other utility model of that design IH 400 or 450, with 2 point hitch that you can buy or make a sort of 3 point adapter for. Ford 4000 Industrial, early to mid 60's I know you said "cheap", but an IH 656 with hydrostatic transmission is real nice. You may not need a "powerful" tractor, but if your logs are like my logs, you need some weight to hold the back end down while hoisting an

18 foot by 24" diameter oak log with that loader, especially if it's a little muddy around the place. Look for a tractor with a lot of hydraulic controls built in so you can add a clam. The IH 300-400 often have 3 valves right up by your right hand. Get power steering. I wouldn't rule out a diesel altogether. I have both around here in central Wisconsin. I just have a 1000 watt heater on my Case 800 diesel, so I go out and plug it in for an hour or two when its cold. gives me time to get an extra cup of coffee. Down here, mostguys think green tractors are overpriced, but there are some good models there, too. A good strong Johjn Deere A with a wide front could do the job. On the other hand, it seems that Allis Chambers tractors are underpriced. I don't know the models very well, and you'd need to check the rear lifts out. I don't know if the older ones have something that is 3-point adaptable.

Pete Stanaitis

-----------------

SBaer wrote:

Thanks, that exactly the kind of info I need. Did you happen to make your saw yourself?

stan

Pete & sheri wrote:

I would check out some of the farm related magazines like The Farm Journal or my favorite Nebraska Farmer. They usually have ads for used equipment in them. Maybe your local library has copies of them or can get them for you on an interlibrary loan.

I live in Lincoln, Nebraska and there is a huge demand from small acreage owners for the smaller 25 to 50 horsepower tractors. For the same amount of money that you would pay for a 50 HP rig 10 years old or so you could probably get a 100HP for about the same money. If you buy down South in the states check out tariffs and import duties before even considering your purchase. Good luck Dennis

Looks like you've received all the good advice already. 95% of the tractors in your search are going to be diesels - I'd just plan on adding the glow plugs and block heaters to use one in the winter. Also make sure the starting system is in perfect condition. With all this, and a shot of starting ether, a diesel will start right up.

There's a publication called "The Land", free to all Minnesota farmers. Its just a want ad magazine. Tons of tractors that you'd want. That IH 656 that was mentioned would be my first choice for your needs.

Karl

A farmer friend of mine has a big place in south Mississippi and has Zetor tractor among others. He loves it as it is tough and very easy to work on when needed. I think it is made in eastern Europe, but I don't know where. I do know that Zetor is a popular brand in Mississippi and not only because it is cheap to buy.

Randy

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required