⏣ General Metalworking

30777 Threads Posts
to

SHIZUOKA mills with ATC any good?

We're starting to scout around for another CNC mill. I plan on adding a new retrofit control to an older machine in goo...
12 comments posted 21yrs
posted by karltownsend.NOT
12 comments posted 21yrs posted by karltownsend.NOT

electronic dial indicator

Hello all I found these in the latest flyer from Lee Valley Tools. A 1/2" and 1" digital dial indicator for $46 and $75...
0 comments posted 21yrs
posted by machineman
0 comments posted 21yrs posted by machineman

The Village Blacksmith vintage farriery FA

The Village Blacksmith by Ronald Webber, spine of dustwrapper slightly sunned,book itself VGC Lovely old book on the hi...
0 comments posted 21yrs
posted by evans_susie
0 comments posted 21yrs posted by evans_susie

Starting low voltage TIG

I have a question, I'm welding thin (1mm) stainless steel using a TIG welder. I don't have any real experince with TIG...
13 comments posted 21yrs
posted by zipper777ATcomcastDOTnet
13 comments posted 21yrs posted by zipper777ATcomcastDOTnet

DTI on Ebay

There is a Batty (British Precision) Dial Gauge DTI on Ebay http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=597216...
0 comments posted 21yrs
posted by oldcramo
0 comments posted 21yrs posted by oldcramo

Source for 3/8 x 26 tap?

Needed to adapt some wingnuts to a SA front axle. The local machine-shop-supply says it's special order and at a price...
12 comments posted 21yrs
posted by jtaylor
12 comments posted 21yrs posted by jtaylor

Spinning-What size to cut the disc?

I bought the metal spinning CD from James Riser and the two DVD set from Terry Tynan. But nowhere was it mentioned how...
6 comments posted 21yrs
posted by etpm
6 comments posted 21yrs posted by etpm

interapid repair

Anyone here have experience dealing with a sticky no repeat interapid? Mine repeats fine in 1 direction but not the othe...
4 comments posted 21yrs
posted by wwj2110
4 comments posted 21yrs posted by wwj2110

Diamond core bit retipping

We have a worn 2 1/2" dia. 16" long "Hilti" diamond core bit. We've cut away 4" and have a new 4" replacement tip. They...
2 comments posted 21yrs
posted by cropseyironworks
2 comments posted 21yrs posted by cropseyironworks

Thiel bandsaw welder problem

Greetings from sunny Melbourne, Australia. I recently bought a 1957 vintage 16" Thiel Nassovia metal cutting bandsaw. I...
1 comments posted 21yrs
posted by mcwgough
1 comments posted 21yrs posted by mcwgough

Geometric Metal-Wire Sculpture (by me)

Yodel, I haven't been back here in a while , for various reasons, none of which are important. Here's the link to Shelt...
0 comments posted 21yrs
posted by quasara
0 comments posted 21yrs posted by quasara

Welding a nut _inside_ a hole and stuff

Still working on the work table stands, and have some 4" channel, facing up and made into something like a cross, as th...
3 comments posted 21yrs
posted by cmciver
3 comments posted 21yrs posted by cmciver

What the Hell is it?

Guys, I picked up a rusty piece of steel and needing to turn it down I tried cutting it in my band saw. Lo and behold,...
20 comments posted 21yrs
posted by jjohnson17
20 comments posted 21yrs posted by jjohnson17

OT-Of interest to all

Passed on to me, by of all people..the Noid. http://www.wtv-zone.com/Mary/PASSINGOFGENERATION.HTML Gunner Rule #35 "That...
13 comments posted 21yrs
posted by gunnerNOSPAM
13 comments posted 21yrs posted by gunnerNOSPAM

50# welding rod cans?

Awhile ago Ernie's school was surplusing some welding rod so I picked up a few fifty-pound cans of 8018. Today I finish...
14 comments posted 21yrs
posted by grant
14 comments posted 21yrs posted by grant