⏣ General Metalworking

30778 Threads Posts
to

Difference in Noga Dial Gage Holders

What is the difference in the Two Speed and One Speed Fine Adjustment Mechanisms on the Noga Dial Gage Holders? Which do...
1 comments posted 22yrs
posted by Sierevello
1 comments posted 22yrs posted by Sierevello

Hilti TE6A

PowerToolreviews.com has review the Hilti TE 6-A. Here is a quote. Quote "The SDS+ chuck that comes standard with the H...
3 comments posted 22yrs
posted by Knothead
3 comments posted 22yrs posted by Knothead

Disappointed with carbide drill bit performance

I recently discovered carbide drill bits. Wow, heavy, big, gold(TiN), and expensive.(Cheap on the bay). So, I drilled a...
3 comments posted 22yrs
posted by bpw67
3 comments posted 22yrs posted by bpw67

radius change on a conventional mill

I need to machine a 6" radius on the face of a piece of 2" x 4"X14" long piece of 316 stainless. The radius will be dee...
4 comments posted 22yrs
posted by jimreid
4 comments posted 22yrs posted by jimreid

Chuck question

I got a used 6 1/4" three jaw chuck a couple of years ago. It has always required a lot of effort to open or close. I t...
6 comments posted 22yrs
posted by rhull
6 comments posted 22yrs posted by rhull

OT Fastow sentenced

Many of us somewhat following the Enron fallout were pleased to see CFO Fastow sentenced to 10 years in the can today, p...
43 comments posted 22yrs
posted by firstratefabNOSPAM
43 comments posted 22yrs posted by firstratefabNOSPAM

heat reating

I am a woodworker and I have never really done any smithing or metal work. But I just purchased some 01 precision groun...
2 comments posted 22yrs
posted by speedbuggy
2 comments posted 22yrs posted by speedbuggy

WANTED: cross slide screw for Clausing 5900 lathe

Hello group, I'm looking for a cross slide screw for my 5900 Clausing lathe. Please respond off-group to snipped-for-pri...
0 comments posted 22yrs
posted by extratec2001
0 comments posted 22yrs posted by extratec2001

another step towards garage utopia!

Hey guys! Last summer I bought a mig welder, then some grinders, a chop saw, and today I bought an 80 cf oxy tank, a 40...
1 comments posted 22yrs
posted by seveer
1 comments posted 22yrs posted by seveer

OT: Deep Fat Fryers

So anyway, SWMBO and me decided our arteries weren't hard enough, So I delved in to the sorted world of DFF. There's a...
11 comments posted 22yrs
posted by jasonrnorth
11 comments posted 22yrs posted by jasonrnorth

Van Norman #12 makes chips!

I bought a #12 Van Norman mill back in November 2002. It appeared to be in decent shape, but was encrusted in gunk and...
66 comments posted 22yrs
posted by spam
66 comments posted 22yrs posted by spam

OT--What did they do?

In Iraq, we're told they have no work, so, What did they do before and during Saddam's reign? Farm, manufacture auto's,...
4 comments posted 22yrs
posted by hel511
4 comments posted 22yrs posted by hel511

international forklift question

i have a diesal forklift with what looks like a 384 engine, my problem is that the fuel pump develops too much internal...
1 comments posted 22yrs
posted by asp3211968
1 comments posted 22yrs posted by asp3211968

FA: "Metals Handbook" Vol 2 going cheap on eBay

"Heat treating, cleaning, and finishing". 1 day left, currently at $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&it...
0 comments posted 22yrs
posted by bobengelhardt
0 comments posted 22yrs posted by bobengelhardt

Cabin Fever Expo (updated 20 Nov 2003)

A reminder. (Updated 20 Nov 2003) Cabin Fever Expo January 17-18, 2004 York Expo Center York, Pennsylvania http://logan...
0 comments posted 22yrs
posted by ssl
0 comments posted 22yrs posted by ssl