ROL NEWS--DG&A Introduces mini-Aramageddon Kit

DG&A Introduces mini-Aramageddon Kit February 2, 2004 Web posted at: 6:59 PM EST

(ROL Newswire) -- DG&A high power rocketry is introducing the mini-Armageddon in a 2.14² kit. It stands at 45-1/2 inches tall. This kit includes a 2.14-inch LOC nose cone; glassine Kraft tubing, 30-inch nylon ripstop parachute and a three-foot section of 1/8 inch braided Kevlar cord for internal use. Used internally due to the high heat produced from motor injections. Also included a 1/8-inch by 12 foot braided nylon shock cord, eyebolt, quick link, and fastening hardware. The main fins, canard fins and nozzle fins are from 1/8-inch birch ply.

1/4² birch ply centering ring and a 29mm motor tube. It also comes with precession computer cut vinyl decals, and a full photo instruction guide. This kit has been designed for those who just like to build or for those who are just getting started into rocketry. Due to its vertical 29mm motor tube size it will allow you to use a number of single use or reload motors ranging from F-20¹s to G-35¹s, 64¹s and even into H-powered motors up to H-128. Allowing you to use this kit for a level-1 attempt. This kit list for $84.99 and sale price: $69.99. Jeff Short from the Austin Texas area will assemble the first mini-Armageddon kit on production. This kit will be released in the latter part of January of 2004. For pre-orders contact DG&A at
formatting link
or email at snipped-for-privacy@aol.com

Source: ROL Newswire Service

Reply to
ROL News
Loading thread data ...

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.