Hi
Is there a way to rotate and position a newly created coordinate system and then create planes on the axis of the coordinate system.
If not is there a solidworks addin that can be purchased?
Thanks
Hi
Is there a way to rotate and position a newly created coordinate system and then create planes on the axis of the coordinate system.
If not is there a solidworks addin that can be purchased?
Thanks
There is probably more the one way to do this. Sketch lines for the three x,y,and z axis. Insert, Reference Geometry, Coordinate System using these sketches. Using the sketches, insert Reference Geometry, Planes. Best Regards, Devon T. Sowell
How about creating the planes first, then apply the coordinate system to that?
When you think about it there has to be three points to define a Csys. That will also define one plane.
It is an interesting thought to have a copy of Front, Right and Top go alone with a Csys.
PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.