1. Home
  2. Model railroading in the UK
  3. Will 'domestic' paint work in an airbrush?

Will 'domestic' paint work in an airbrush?

Although my model is US outline the problems are the same for UK outline and I need help from people in the UK please.

I have quite a bit of track to be painted before ballasting. Up to now I've only painted a relatively small area. mainly around pointwork. I have now laid quite a bit more track and the time has come to paint most of this track.

My previous painting has been done laboriously using a paint brush. I'm quite happy to continue to do this around the points but I'm hoping to use an airbrush to spray the main part of the track including the ties (sleepers).

Up to now I've only bought small paint containers. I will need a lot more paint. I'm considering taking a sample to my local paint merchant and asking them to match the colour I'm already using. If they can do this I can then mix up a quantity to a consistency suitable for spraying.

Before doing this I have a few questions.

Has anyone done this? Was It successful? Do you think that I can get the (water based) paint thin enough? Will 'domestic' (emulsion) paint be OK or do I need to find a specialist.

Your experience and advice much appreciated.

If it helps this is for my loft layout here's an example of the track I will be painting

formatting link

Reply to
Mike Hughes
Loading thread data ...

Answer to subject line query: Only if you use an airbrush (sprayer) intended for it. Pigment in "domestic" paint is quite large compared to that in model paints.

HTH wolf k.

Reply to
Wolf K

Mike How much track do you need to paint? Using a reasonable quality airbrush I would expect to be able to weather a very large layout with one or two jars of normal modelling acrylic or enamel paint. I cant see the need to trouble of trying to use domestic paint :-)

R

Reply to
Rich

I don't even get the airbrush out for this, but I only have about half a kilometre of track to do...

Guy

Reply to
Just zis Guy, you know?

Thanks Wolf. There was something in the deep dark recesses of my memory that told me this but I needed to have it confirmed.

Looks like it will have to be another plan :-)

Reply to
Mike Hughes

In message , Rich writes

I will have a minimum of 100 actual yards of track not counting the various points, etc. And there will be more to come later.

Part of the problem is that I've already used some acrylic paint I got in small containers from a model shop and I'd like to use the same, or very nearly the same colour for the large (non pointwork) area. That's why I though that I could get the colour matched at the local B&Q or similar.

On reflection it would probably be easier to ask my friendly model shop (The Hobby Box in Uckfield if anyone wants to know somewhere you will get good friendly service!) I bought the original paint from and see if they can get larger quantities for me.

With the above in mind how much do you think I would be likely to need? I'm painting on to rail and track which is fixed to cork on plywood so this may be very absorbent. I realise that I'll probably have to apply at least two coats of paint, the first being diluted about 50/50 and any subsequent coats being stronger - unless experiments prove otherwise (I'm not holding my breath)

Thanks for your welcome advice

Reply to
Mike Hughes

I must admit I assumed that the track would be ballasted and that you would be simply weathering down the track. When airbrushing with a good brush the amount of paint you use is very small. I am guessing but with suitable thinned paint as a rule of thumb 1ml to the yard. But it does really depend on your ability with the airbrush and the amount of overspray.

e-mail me offline and we can have a chat about spraying

Reply to
Rich

PolyTech Forum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.